Nie czyta karty cyfry 0100

2 Stycznia 2015

Siema, mam pytanie do znawców: co należy zrobić, aby uruchomić kartę c+ 0100 na oscam w opticumie 9500 HD?W moim 9500 HD mam odpaloną E2 na pendrive i korzystam z oscama. Soft Teslanet od ruskich i na nim N 0B01 działa idealnie. Mam też kartę c+ 0100, ale niestety oscam po 2 minutach inicjalizacji wyrzuca error w statusie. Karta 100% sprawna - sprawdzana.Dodam, że każdy user, który ma ten soft nie może odpalić 0100 na oscam.Na emulatorze wicardd - idzie, ale ja wolałbym oscama.Dodam, że na innych image z E2 dla 9500, np tych starszych z PKT, czy niemieckich karta 0100 działa w oscamie.Co należy zrobić, aby karta ruszyła? Podmiana jakichś plików? Brak jakichś bibliotek?Image nie chcę zmieniać, gdyż jest bardzo stabilne (jak na image do 9500).Proszę o pomoc i wydaje mi się, że nie tylko ja będę wdzięczny za rozwiązanie zagadki Zapomniałem napisać, że jest to Open PLI python 2.7.

Pozdrawiam

mickey · 2 Stycznia 2015

A co masz w plikach konfiguracyjnych? Nie masz czegoś co wymusza działanie tylko z 0B01? Jaka wersja oscama? Jaki error dokładnie? Co jest w logu?

Ehhh.... A tak ogólnie, to może gdybym odwiedzał jakieś forum, na którym piszą coś więcej to wiedziałbym coś więcej, ale po przeczytaniu samego posta nawet trudno zgadywać. Chcesz, żeby pomóc, ale nie podajesz żadnych szczegółów.

2 Stycznia 2015

Oscam - dowolny, a ostatnio 10044.

Konfig, proszę:

[reader]
label                         = c+
description                   = 
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
key                           = 
password                      = 
pincode                       = none
gbox_max_distance             = 2
gbox_max_ecm_send             = 3
gbox_reshare                  = 0
readnano                      = 
services                      = 
lb_whitelist_services         = 
reconnectdelay                = 60000
resetcycle                    = 0
keepalive                     = 0
smargopatch                   = 0
autospeed                     = 1
sc8in1_dtrrts_patch           = 0
fallback                      = 0
fallback_percaid              = 
localcards                    = 
cacheex                       = 0
cacheex_maxhop                = 0
cacheex_ecm_filter            = 
cacheex_allow_request         = 0
cacheex_drop_csp              = 0
cacheex_allow_filter          = 1
caid                          = 0100
atr                           = 
boxid                         = 
boxkey                        = 
rsakey                        = 
ins7e                         = 
ins7e11                       = 
ins2e06                       = 
fix07                         = 1
fix9993                       = 0
force_irdeto                  = 0
needsemmfirst                 = 0
ecmnotfoundlimit              = 0
ecmwhitelist                  = 
ecmheaderwhitelist            = 
detect                        = cd
nagra_read                    = 0
mhz                           = 357
cardmhz                       = 357
ident                         = 
chid                          = 
class                         = 
aeskeys                       = 
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 0
blockemm-u                    = 0
blockemm-s                    = 0
blockemm-g                    = 0
saveemm-unknown               = 0
saveemm-u                     = 0
saveemm-s                     = 0
saveemm-g                     = 0
blockemm-bylen                = 
lb_weight                     = 100
lb_force_fallback             = 0
savenano                      = 
blocknano                     = 
dropbadcws                    = 0
disablecrccws                 = 0
use_gpio                      = 0
cccreshare                    = 1
ccchop                        = 0
use_ssl                       = 0
deprecated                    = 0
audisabled                    = 0
auprovid                      = 
ndsversion                    = 0
ratelimitecm                  = 0
ratelimittime                 = 0
ecmunique                     = 0
srvidholdtime                 = 0
cooldown                      = 0,0

LOG z oscama:

2015/01/02 17:58:33   5D09F8 r c+ [internal] IFD: Opening device /dev/sci0
2015/01/02 17:58:33   5D09F8 r c+ [internal] IFD: Device /dev/sci0 succesfully opened
2015/01/02 17:58:33   5D09F8 r c+ [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2015/01/02 17:58:33   5D09F8 r c+ [internal] card detected
2015/01/02 17:58:33   5D09F8 r c+ [internal] IFD: Activating card
2015/01/02 17:58:33   5D09F8 r c+ [internal] IFD: Is card present?
2015/01/02 17:58:33   5D09F8 r c+ [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2015/01/02 17:58:37   5D09F8 r c+ [internal] IFD: This card uses direct convention
2015/01/02 17:58:37   5D09F8 r c+ [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6 
2015/01/02 17:58:37   5D09F8 r c+ [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
2015/01/02 17:58:37   5D09F8 r c+ [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/01/02 17:58:37   5D09F8 r c+ [internal] IFD: Answer to flush byte 1 = 0x90
2015/01/02 17:58:37   5D09F8 r c+ [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
2015/01/02 17:58:40   5D09F8 r c+ [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/01/02 17:58:40   5D09F8 r c+ [internal] IFD: Card succesfully activated
2015/01/02 17:58:41   5D09F8 r c+ [internal] detect seca/nagra tunneled card
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Setting timeout to 13 ETU (967 us)
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Transmit:2015/01/02 17:58:41   5D09F8    80 CA 00 00 11 
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Transmit succesful
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Receive succesful
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Setting timeout to 13 ETU (967 us)
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Transmit:
2015/01/02 17:58:41   5D09F8    80 CA 00 00 11 
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Transmit succesful
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Receive succesful
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Setting timeout to 13 ETU (967 us)
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Transmit:
2015/01/02 17:58:41   5D09F8    C1 0E 00 00 08 
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Transmit succesful
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
2015/01/02 17:58:41   5D09F8 r c+ [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
2015/01/02 17:58:52   5D09F8 r c+ [internal] IFD: Setting timeout to 13 ETU (967 us)
2015/01/02 17:58:52   5D09F8 r c+ [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
2015/01/02 17:58:52   5D09F8 r c+ [internal] IFD: Transmit:
2015/01/02 17:58:52   5D09F8    C1 0E 00 00 08 
2015/01/02 17:58:52   5D09F8 r c+ [internal] IFD: Transmit succesful
2015/01/02 17:58:52   5D09F8 r c+ [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
2015/01/02 17:58:52   5D09F8 r c+ [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
2015/01/02 17:59:02   5D09F8 r c+ [internal] card system not supported
2015/01/02 17:59:02   5D09F8 r c+ [internal] Normal mode failed, reverting to Deprecated Mode
2015/01/02 17:59:02   5D09F8 r c+ [internal] IFD: Activating card
2015/01/02 17:59:02   5D09F8 r c+ [internal] IFD: Is card present?
2015/01/02 17:59:03   5D09F8 r c+ [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2015/01/02 17:59:07   5D09F8 r c+ [internal] IFD: This card uses direct convention
2015/01/02 17:59:07   5D09F8 r c+ [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6 
2015/01/02 17:59:07   5D09F8 r c+ [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
2015/01/02 17:59:07   5D09F8 r c+ [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/01/02 17:59:07   5D09F8 r c+ [internal] IFD: Answer to flush byte 1 = 0x90
2015/01/02 17:59:07   5D09F8 r c+ [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
2015/01/02 17:59:09   5D09F8 r c+ [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/01/02 17:59:09   5D09F8 r c+ [internal] IFD: Card succesfully activated
2015/01/02 17:59:10   5D09F8 r c+ [internal] detect seca/nagra tunneled card
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Setting timeout to 13 ETU (967 us)
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Transmit:
2015/01/02 17:59:10   5D09F8    80 CA 00 00 11 
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Transmit succesful
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Receive succesful
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Setting timeout to 13 ETU (967 us)
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Transmit:
2015/01/02 17:59:10   5D09F8    80 CA 00 00 11 
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Transmit succesful
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Receive succesful
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Setting timeout to 13 ETU (967 us)
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Transmit:
2015/01/02 17:59:10   5D09F8    C1 0E 00 00 08 
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Transmit succesful
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
2015/01/02 17:59:10   5D09F8 r c+ [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
2015/01/02 17:59:21   5D09F8 r c+ [internal] IFD: Setting timeout to 13 ETU (967 us)
2015/01/02 17:59:21   5D09F8 r c+ [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
2015/01/02 17:59:21   5D09F8 r c+ [internal] IFD: Transmit:
2015/01/02 17:59:21   5D09F8    C1 0E 00 00 08 
2015/01/02 17:59:21   5D09F8 r c+ [internal] IFD: Transmit succesful
2015/01/02 17:59:21   5D09F8 r c+ [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
2015/01/02 17:59:21   5D09F8 r c+ [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
2015/01/02 17:59:32   5D09F8 r c+ [internal] card system not supported
2015/01/02 17:59:32   5D09F8 r c+ [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/02 17:59:32   5D09F8 r c+ [internal] card initializing error

Moim zdaniem tutaj chodzi o sterownik do karty, mój nie działa z 0100.

AbrahaM · 2 Stycznia 2015

Oscam - dowolny, a ostatnio 10044.

Moim zdaniem tutaj chodzi o sterownik do karty, mój nie działa z 0100.

trzy sprawy:

1. wrzuć najnowszy oscam,

2. wrzuć taktowanie 500/500

3. jeśli problem się powtórzy, wrzuć jeszcze raz log z najnowszej wersji, tylko bez rozwalonego formatowania, przeczytanie tego co dałeś graniczy z cudem, musiałem to ręcznie przeformowatować by odczytać.

niestety jest niezerowe ryzyko, że w image macie wadliwy sterownik do czytników wewnętrznych, jeśli to jest ta przyczyna, to tego się nie da obejść na poziomie oscama, pozostaje użyć tylko nowszego/innego image. mam kogo spytać na szczęście, ale jak pisałem, mam obawy że z tym się nic nie da zrobić.

2 Stycznia 2015

Nie wrzucałem logów bo to samo na oscamie 10116 z parametrami 500/500.

Moja prośba byłaby bardziej skierowane w sterownik - czy jest ktoś, kto ma odpowiedni sterownik (kilka sterowników) żebym mógł podmienić i sprawdzić wraz z innymi wpisami?

P.S. dziękuję za poprawienie mojego posta z formatowaniem.

Aha, dekoder: Opticum 9500 HD z wgraną E2 a dokładnie Teslanet Open PLI od kolegów z Rosji. Niestety nowsze softy nie wychodzą a ten mam tak skonfigurowany, że nie pamiętam kiedy ostatnio miałem GS, co we wcześniejszych dystrybucjach np. polskich to po kilka razy dziennie.

Wersja Enigmy 2013-01-25-last

 cat /proc/cpuinfo
machine         : STb7100 Reference board
processor       : 0
cpu family      : sh4
cpu variant     : sh4-202
cpu type        : STx7109
cut             : 3.2
cpu flags       : fpu
cache type      : split (harvard)
icache size     : 16KiB (2-way)
dcache size     : 32KiB (2-way)
address sizes   : 29 bits physical
bogomips        : 264.60

lsmod
Module                  Size  Used by    Tainted: P
smartcard              17980  2
silencegen               620  0
platform                 816  0 [permanent]
stmalloc                1168  0
sth264pp                3636  0
player2               360996  2 stmalloc,sth264pp,[permanent]
stmdvb                 90124  5 player2
cimax                   3672  3 stmdvb
stmsysfs               29508  0
option                 12088  0
stm_monitor             5764  1 player2
usb_wwan                3444  1 option
usbserial              13360  2 option,usb_wwan
pti                    23228  1 stmdvb
fe_core                57584  1 stmdvb
pseudocard             12120  2 player2,stmdvb
stm_v4l2                7152  1 stmdvb
p2div64                 1228  3 player2,stm_monitor,fe_core
ksound                 10016  1 player2
mpeg2hw                 3240  0
mmelog                  1440  0
avs                    22976  1 stmdvb
mme_host               22916  5 silencegen,player2,stm_monitor,mpeg2hw,mmelog
embxshm                18968  0
embxmailbox             5328  1 embxshm
embxshell              17064  3 mme_host,embxshm,embxmailbox
stmfb                  37240  3 stmdvb
stmcore_display_stx7109c3   135817  4 player2,stmdvb,pseudocard
e2_proc                10012  2 player2,stmdvb
simu_button              636  0
proton                 89132  0

cat /proc/version
Linux version 2.6.32.59_stm24_0211 (piterkadet@piterkadet-VM) (gcc version 4.7.2 20130218 (STMicroelectronics/Linux Base 4.7.2-117) (GCC) ) #1 PREEMPT Mon Apr 1 07:20:09 MSK 2013

cat /proc/modules
smartcard 17980 2 - Live 0xc14a7000
silencegen 620 0 - Live 0xc1499000
platform 816 0 [permanent], Live 0xc1490000
stmalloc 1168 0 - Live 0xc1487000
sth264pp 3636 0 - Live 0xc1480000
player2 360996 2 stmalloc,sth264pp,[permanent], Live 0xc13ff000
stmdvb 90124 5 player2, Live 0xc1277000
cimax 3672 3 stmdvb, Live 0xc1254000
stmsysfs 29508 0 - Live 0xc1243000
option 12088 0 - Live 0xc1236000
stm_monitor 5764 1 player2, Live 0xc121e000
usb_wwan 3444 1 option, Live 0xc1216000
usbserial 13360 2 option,usb_wwan, Live 0xc1208000
pti 23228 1 stmdvb, Live 0xc11f4000 (P)
fe_core 57584 1 stmdvb, Live 0xc11d5000
pseudocard 12120 2 player2,stmdvb, Live 0xc11b8000
stm_v4l2 7152 1 stmdvb, Live 0xc11a7000
p2div64 1228 3 player2,stm_monitor,fe_core, Live 0xc119f000
ksound 10016 1 player2, Live 0xc1194000
mpeg2hw 3240 0 - Live 0xc1186000
mmelog 1440 0 - Live 0xc117b000
avs 22976 1 stmdvb, Live 0xc116c000
mme_host 22916 5 silencegen,player2,stm_monitor,mpeg2hw,mmelog, Live 0xc1157000
embxshm 18968 0 - Live 0xc1140000
embxmailbox 5328 1 embxshm, Live 0xc112e000
embxshell 17064 3 mme_host,embxshm,embxmailbox, Live 0xc111e000
stmfb 37240 3 stmdvb, Live 0xc1104000
stmcore_display_stx7109c3 135817 4 player2,stmdvb,pseudocard, Live 0xc10d2000
e2_proc 10012 2 player2,stmdvb, Live 0xc1083000
simu_button 636 0 - Live 0xc1076000
proton 89132 0 - Live 0xc1058000

Jeśli jest cień szansy, proszę o pomoc - wiele osób ma z tym problemy.

AbrahaM · 2 Stycznia 2015

Jeśli jest cień szansy, proszę o pomoc - wiele osób ma z tym problemy.

Pytanie poleciało do developera oscama. Sprawdź czy system w tym odbiorniku jest w stanie obsłużyć zewnętrzne czytniki phoenix. To może być niestety jedyne wyjście by mieć normalnie działające karty.

2 Stycznia 2015

Pytanie poleciało do developera oscama. Sprawdź czy system w tym odbiorniku jest w stanie obsłużyć zewnętrzne czytniki phoenix. To może być niestety jedyne wyjście by mieć normalnie działające karty.

A jak należy to sprawdzić, bo ja mam phoenixa podpinanego po COM, ale jak podpiąłem do tunera po rs232, to dekoder w ogóle nie startował.

tux · 2 Stycznia 2015

Bo RS232 w tym tunerze nie do tego służy. Użyj USB.

2 Stycznia 2015

Niestety mój phoenix ma tylko rs232

tux · 2 Stycznia 2015

Użyć czytnika z konwerterem RS232 → USB lub kupić konwerter do obecnego.

AbrahaM · 2 Stycznia 2015

Użyć czytnika z konwerterem RS232 → USB lub kupić konwerter do obecnego.

jeśli już to ma być nowy phoenix, to polecam >>>> takiego <<<<.

Mimo wszystko proszę o log z 10116. Między wersjami jest nieco zmian, w tym "więcej logowania" tego, co się dzieje w trakcie komunikacji z kartą.

2 Stycznia 2015

Ale nawet po kupnie nie będę miał pewności, czy mój teslanet pociągnie phoenixa.

Mam jeszcze Wyse w domu, powalczę. Jednak czytnik w 9500 to też dla mnie ważna sprawa, zwłaszcza że 0B01 działa, a 0100 nie chce :( .

Z przyjemnością podam logi, wskaż jeszcze który debug.

tux · 2 Stycznia 2015

Opticum z tego co pamiętam ma czytniki Conax. Nie mam jednak informacji czy sprzętowo jest to Conax czy limit software.

AbrahaM · 2 Stycznia 2015

Z przyjemnością podam logi, wskaż jeszcze który debug.

cytuję developera: prosi o użycie tych samych ustawień, co wtedy, tylko na 10116.

upewnij się, że DZIAŁASZ na 10116, a nie tylko, że go WGRAŁEś, gdyż (cytuję):

2015/01/02 17:58:37 5D09F8 r c+ [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/01/02 17:58:37 5D09F8 r c+ [internal] IFD: Answer to flush byte 1

can be seen it's much older then 10044. svn is below 10000

log odczytaj editpad lite lub notepad++ a potem wklej tu, inaczej będzie szatkownica nieczytelna :(

2 Stycznia 2015

Chłopaki, ja bardzo przepraszam za formatowanie, Notepad2 pomógł :) , dzięki. Czekam na dalsze instrukcje. Oscam pobrany z http://download.oscam.cc/index.php?&direction=0&order=mod&directory=1.20_TRUNK/sh4-amino wersja 10116

2015/01/02 21:15:32 5D0770 h Reader c+ restarted by WebIF from 192.168.1.101
2015/01/02 21:15:33 5DF2D0 r c+ [internal] card system not supported
2015/01/02 21:15:33 5DF2D0 r c+ [internal] Normal mode failed, reverting to Deprecated Mode
2015/01/02 21:15:35 5D0770 h Reader c+ restarted by WebIF from 192.168.1.101
2015/01/02 21:15:37 5DF2D0 r c+ [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2015/01/02 21:15:37 5DF2D0 r c+ [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
2015/01/02 21:15:37 5DF2D0 r c+ [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/01/02 21:15:40 5DF2D0 r c+ [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/01/02 21:15:41 5DF2D0 r c+ [internal] detect seca/nagra tunneled card

2015/01/02 21:16:02 5DF2D0 r c+ [internal] card system not supported
2015/01/02 21:16:02 5DF2D0 r c+ [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/02 21:16:02 5DF2D0 r c+ [internal] card initializing error
2015/01/02 21:16:31 5D0770 h Reader c+ restarted by WebIF from 192.168.1.101
2015/01/02 21:16:32 5DF2D0 r c+ [internal] Deactivating card
2015/01/02 21:16:33 5DF2D0 r c+ [internal] creating thread for device /dev/sci0
2015/01/02 21:16:33 5E7C18 r c+ [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2015/01/02 21:16:33 5E7C18 r c+ [internal] card detected
2015/01/02 21:16:37 5E7C18 r c+ [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2015/01/02 21:16:37 5E7C18 r c+ [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
2015/01/02 21:16:37 5E7C18 r c+ [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/01/02 21:16:40 5E7C18 r c+ [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/01/02 21:16:41 5E7C18 r c+ [internal] detect seca/nagra tunneled card

tux · 2 Stycznia 2015

Błagam → na forum działa dodawanie załączników.

AbrahaM · 2 Stycznia 2015

Chłopaki, ja bardzo przepraszam za formatowanie, Notepad2 pomógł :)

no to "jadziem dalej"

1. zmień binarkę, wersje "amino" są znane z wariowania, spróbuj "nodebug" od nas z forum

2. log do kosza. po wycięciu komunikatów od dvbapi, widać że nie jest cały.

3. zmień nazwę czytnikowi na sci0

4. w sekcji livelog wpisz w linii nr1 sci0 i zaznacz "found only", to odsieje śmieci dvbapi i inne komunikaty "nie na temat"

5. wrzuć przynajmniej logowanie na poziomie 16, dorzucenie poziomu 1 nie zaszkodzi

6. przestaw pmt_mode (w sekcji dvbapi) na 0, u nas jest domyślnie 6, u ciebie to może nie działać

2 Stycznia 2015

1. Binarka nodebug z Waszego forum od qboxhd nie ruszyła - zostawilem amino 10044.

6. PMT-Mode było na 0.


    2015/01/02 21:52:15 5CD768 h Reader sci0 restarted by WebIF from 192.168.1.101
    2015/01/02 21:52:15 5F55D8 r data from add_job action=9 client r sci0
    2015/01/02 21:52:16 5F55D8 r sci0 [internal] IFD: Closing device /dev/sci0
    2015/01/02 21:52:16 5F55D8 r sci0 [internal] Deactivating card
    2015/01/02 21:52:17 5F55D8 r sci0 [internal] IFD: Device /dev/sci0 succesfully closed
    2015/01/02 21:52:17 5F55D8 r sci0 [internal] creating thread for device /dev/sci0
    2015/01/02 21:52:17 5FA408 r data from add_job action=8 client r sci0
    2015/01/02 21:52:17 5FA408 r sci0 [internal] IFD: Opening device /dev/sci0
    2015/01/02 21:52:17 5FA408 r sci0 [internal] IFD: Device /dev/sci0 succesfully opened
    2015/01/02 21:52:17 5FA408 r sci0 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
    2015/01/02 21:52:17 5FA408 r sci0 [internal] card detected
    2015/01/02 21:52:17 5FA408 r add reader job action 4 queue length 1 sci0
    2015/01/02 21:52:17 5FA408 r sci0 [internal] IFD: Activating card
    2015/01/02 21:52:17 5FA408 r sci0 [internal] IFD: Is card present?
    2015/01/02 21:52:17 5FA408 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/02 21:52:22 5FA408 r sci0 [internal] IFD: This card uses direct convention
    2015/01/02 21:52:22 5FA408 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/02 21:52:22 5FA408 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/02 21:52:22 5FA408 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/02 21:52:22 5FA408 r sci0 [internal] IFD: Answer to flush byte 1 = 0x90
    2015/01/02 21:52:22 5FA408 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/02 21:52:24 5FA408 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/02 21:52:24 5FA408 r sci0 [internal] IFD: Card succesfully activated
    2015/01/02 21:52:25 5FA408 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Receive succesful
    2015/01/02 21:52:25 5FA408 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Receive succesful
    2015/01/02 21:52:25 5FA408 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 21:52:25 5FA408 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:52:25 5FA408 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:52:36 5FA408 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:52:36 5FA408 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:52:36 5FA408 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:52:36 5FA408 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:52:36 5FA408 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:52:36 5FA408 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:52:47 5FA408 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 21:52:47 5FA408 r sci0 [internal] card system not supported
    2015/01/02 21:52:47 5FA408 r sci0 [internal] Normal mode failed, reverting to Deprecated Mode
    2015/01/02 21:52:47 5FA408 r sci0 [internal] IFD: Activating card
    2015/01/02 21:52:47 5FA408 r sci0 [internal] IFD: Is card present?
    2015/01/02 21:52:47 5FA408 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/02 21:52:51 5FA408 r sci0 [internal] IFD: This card uses direct convention
    2015/01/02 21:52:51 5FA408 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/02 21:52:51 5FA408 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/02 21:52:51 5FA408 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/02 21:52:51 5FA408 r sci0 [internal] IFD: Answer to flush byte 1 = 0x90
    2015/01/02 21:52:51 5FA408 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/02 21:52:55 5FA408 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Receive succesful
    2015/01/02 21:52:55 5FA408 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Receive succesful
    2015/01/02 21:52:55 5FA408 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 21:52:55 5FA408 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:52:55 5FA408 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:53:05 5FA408 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:53:05 5FA408 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:53:05 5FA408 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:53:05 5FA408 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:53:05 5FA408 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:53:05 5FA408 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:53:16 5FA408 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 21:53:16 5FA408 r sci0 [internal] card system not supported
    2015/01/02 21:53:16 5FA408 r sci0 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
    2015/01/02 21:53:16 5FA408 r sci0 [internal] card initializing error
    2015/01/02 21:53:44 5CD768 h Reader sci0 restarted by WebIF from 192.168.1.101
    2015/01/02 21:53:44 5FA408 r data from add_job action=9 client r sci0
    2015/01/02 21:53:45 5FA408 r sci0 [internal] IFD: Closing device /dev/sci0
    2015/01/02 21:53:45 5FA408 r sci0 [internal] Deactivating card
    2015/01/02 21:53:45 5FA408 r sci0 [internal] IFD: Device /dev/sci0 succesfully closed
    2015/01/02 21:53:45 5FA408 r sci0 [internal] creating thread for device /dev/sci0
    2015/01/02 21:53:45 5F4468 r data from add_job action=8 client r sci0
    2015/01/02 21:53:45 5F4468 r sci0 [internal] IFD: Opening device /dev/sci0
    2015/01/02 21:53:45 5F4468 r sci0 [internal] IFD: Device /dev/sci0 succesfully opened
    2015/01/02 21:53:45 5F4468 r sci0 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
    2015/01/02 21:53:46 5F4468 r sci0 [internal] card detected
    2015/01/02 21:53:46 5F4468 r add reader job action 4 queue length 1 sci0
    2015/01/02 21:53:46 5F4468 r sci0 [internal] IFD: Activating card
    2015/01/02 21:53:46 5F4468 r sci0 [internal] IFD: Is card present?
    2015/01/02 21:53:46 5F4468 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/02 21:53:50 5F4468 r sci0 [internal] IFD: This card uses direct convention
    2015/01/02 21:53:50 5F4468 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/02 21:53:50 5F4468 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/02 21:53:50 5F4468 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/02 21:53:50 5F4468 r sci0 [internal] IFD: Answer to flush byte 1 = 0x90
    2015/01/02 21:53:50 5F4468 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/02 21:53:53 5F4468 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/02 21:53:53 5F4468 r sci0 [internal] IFD: Card succesfully activated
    2015/01/02 21:53:54 5F4468 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Receive succesful
    2015/01/02 21:53:54 5F4468 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Receive succesful
    2015/01/02 21:53:54 5F4468 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 21:53:54 5F4468 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:53:54 5F4468 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:54:05 5F4468 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:54:05 5F4468 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:54:05 5F4468 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:54:05 5F4468 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:54:05 5F4468 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:54:05 5F4468 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:54:15 5F4468 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 21:54:15 5F4468 r sci0 [internal] card system not supported
    2015/01/02 21:54:15 5F4468 r sci0 [internal] Normal mode failed, reverting to Deprecated Mode
    2015/01/02 21:54:15 5F4468 r sci0 [internal] IFD: Activating card
    2015/01/02 21:54:15 5F4468 r sci0 [internal] IFD: Is card present?
    2015/01/02 21:54:16 5F4468 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/02 21:54:20 5F4468 r sci0 [internal] IFD: This card uses direct convention
    2015/01/02 21:54:20 5F4468 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/02 21:54:20 5F4468 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/02 21:54:20 5F4468 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/02 21:54:20 5F4468 r sci0 [internal] IFD: Answer to flush byte 1 = 0x90
    2015/01/02 21:54:20 5F4468 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/02 21:54:22 5F4468 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/02 21:54:22 5F4468 r sci0 [internal] IFD: Card succesfully activated
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Receive succesful
    2015/01/02 21:54:23 5F4468 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Receive succesful
    2015/01/02 21:54:23 5F4468 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 21:54:23 5F4468 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:54:23 5F4468 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:54:34 5F4468 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 21:54:34 5F4468 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 21:54:34 5F4468 r sci0 [internal] IFD: Transmit:
    2015/01/02 21:54:34 5F4468 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 21:54:34 5F4468 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 21:54:34 5F4468 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 21:54:45 5F4468 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 21:54:45 5F4468 r sci0 [internal] card system not supported
    2015/01/02 21:54:45 5F4468 r sci0 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
    2015/01/02 21:54:45 5F4468 r sci0 [internal] card initializing error

AbrahaM · 2 Stycznia 2015

1. Binarka nodebug z Waszego forum od qboxhd nie ruszyła - zostawilem amino 10044.

to mi nic nie daje, potrzebuje log z aktualnej wersji, a nie z 10044. zaraz dostaniesz link do wersji którą wypluje ci ręcznie. przypuszczalnie wasz soft nie ma SSL i dlatego nie wstała.

2 Stycznia 2015

Podaję log z binarki qbox multipatch


    2015/01/02 23:10:00 582F00 h add reader job action 9 queue length 1 sci0
    2015/01/02 23:10:00 582F00 h Reader sci0 restarted by WebIF from 192.168.1.101
    2015/01/02 23:10:01 5C4AC8 r sci0 [internal] IFD: Closing device /dev/sci0
    2015/01/02 23:10:01 5C4AC8 r sci0 [internal] Deactivating card
    2015/01/02 23:10:01 5C4AC8 r sci0 [internal] IFD: Device /dev/sci0 succesfully closed
    2015/01/02 23:10:01 5C4AC8 r sci0 [internal] creating thread for device /dev/sci0
    2015/01/02 23:10:01 5BC2C0 r data from add_job action=8 client r sci0
    2015/01/02 23:10:01 5BC2C0 r sci0 [internal] IFD: Opening device /dev/sci0
    2015/01/02 23:10:01 5BC2C0 r sci0 [internal] IFD: Device /dev/sci0 succesfully opened
    2015/01/02 23:10:01 5BC2C0 r sci0 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
    2015/01/02 23:10:02 5BC2C0 r sci0 [internal] card detected
    2015/01/02 23:10:02 5BC2C0 r add reader job action 4 queue length 1 sci0
    2015/01/02 23:10:02 5BC2C0 r sci0 [internal] IFD: Activating card
    2015/01/02 23:10:02 5BC2C0 r sci0 [internal] IFD: Is card present?
    2015/01/02 23:10:02 5BC2C0 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/02 23:10:06 5BC2C0 r sci0 [internal] IFD: This card uses direct convention
    2015/01/02 23:10:06 5BC2C0 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/02 23:10:06 5BC2C0 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/02 23:10:06 5BC2C0 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/02 23:10:06 5BC2C0 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/02 23:10:09 5BC2C0 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/02 23:10:09 5BC2C0 r sci0 [internal] IFD: Card succesfully activated
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Receive succesful
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Receive succesful
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:10:10 5BC2C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:10:20 5BC2C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:10:20 5BC2C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:10:20 5BC2C0 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:10:20 5BC2C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:10:20 5BC2C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:10:20 5BC2C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:10:31 5BC2C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 23:10:31 5BC2C0 r sci0 [internal] card system not supported
    2015/01/02 23:10:31 5BC2C0 r sci0 [internal] Normal mode failed, reverting to Deprecated Mode
    2015/01/02 23:10:31 5BC2C0 r sci0 [internal] IFD: Activating card
    2015/01/02 23:10:31 5BC2C0 r sci0 [internal] IFD: Is card present?
    2015/01/02 23:10:31 5BC2C0 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/02 23:10:35 5BC2C0 r sci0 [internal] IFD: This card uses direct convention
    2015/01/02 23:10:36 5BC2C0 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/02 23:10:36 5BC2C0 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/02 23:10:36 5BC2C0 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/02 23:10:36 5BC2C0 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/02 23:10:38 5BC2C0 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/02 23:10:38 5BC2C0 r sci0 [internal] IFD: Card succesfully activated
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Receive succesful
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Receive succesful
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:10:39 5BC2C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:10:50 5BC2C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:10:50 5BC2C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:10:50 5BC2C0 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:10:50 5BC2C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:10:50 5BC2C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:10:50 5BC2C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:11:01 5BC2C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 23:11:01 5BC2C0 r sci0 [internal] card system not supported
    2015/01/02 23:11:01 5BC2C0 r sci0 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
    2015/01/02 23:11:01 5BC2C0 r sci0 [internal] card initializing error
    2015/01/02 23:11:29 582F00 h Reader sci0 restarted by WebIF from 192.168.1.101
    2015/01/02 23:11:29 5BC2C0 r data from add_job action=9 client r sci0
    2015/01/02 23:11:30 5BC2C0 r sci0 [internal] IFD: Closing device /dev/sci0
    2015/01/02 23:11:30 5BC2C0 r sci0 [internal] Deactivating card
    2015/01/02 23:11:30 5BC2C0 r sci0 [internal] IFD: Device /dev/sci0 succesfully closed
    2015/01/02 23:11:30 5BC2C0 r sci0 [internal] creating thread for device /dev/sci0
    2015/01/02 23:11:30 5C4AC8 r data from add_job action=8 client r sci0
    2015/01/02 23:11:30 5C4AC8 r sci0 [internal] IFD: Opening device /dev/sci0
    2015/01/02 23:11:30 5C4AC8 r sci0 [internal] IFD: Device /dev/sci0 succesfully opened
    2015/01/02 23:11:30 5C4AC8 r sci0 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
    2015/01/02 23:11:31 5C4AC8 r sci0 [internal] card detected
    2015/01/02 23:11:31 5C4AC8 r add reader job action 4 queue length 1 sci0
    2015/01/02 23:11:31 5C4AC8 r sci0 [internal] IFD: Activating card
    2015/01/02 23:11:31 5C4AC8 r sci0 [internal] IFD: Is card present?
    2015/01/02 23:11:31 5C4AC8 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/02 23:11:36 5C4AC8 r sci0 [internal] IFD: This card uses direct convention
    2015/01/02 23:11:36 5C4AC8 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/02 23:11:36 5C4AC8 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/02 23:11:36 5C4AC8 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/02 23:11:36 5C4AC8 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/02 23:11:38 5C4AC8 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/02 23:11:38 5C4AC8 r sci0 [internal] IFD: Card succesfully activated
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Receive succesful
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Receive succesful
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:11:39 5C4AC8 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:11:50 5C4AC8 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:11:50 5C4AC8 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:11:50 5C4AC8 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:11:50 5C4AC8 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:11:50 5C4AC8 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:11:50 5C4AC8 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:12:01 5C4AC8 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 23:12:01 5C4AC8 r sci0 [internal] card system not supported
    2015/01/02 23:12:01 5C4AC8 r sci0 [internal] Normal mode failed, reverting to Deprecated Mode
    2015/01/02 23:12:01 5C4AC8 r sci0 [internal] IFD: Activating card
    2015/01/02 23:12:01 5C4AC8 r sci0 [internal] IFD: Is card present?
    2015/01/02 23:12:01 5C4AC8 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/02 23:12:05 5C4AC8 r sci0 [internal] IFD: This card uses direct convention
    2015/01/02 23:12:05 5C4AC8 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/02 23:12:05 5C4AC8 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/02 23:12:05 5C4AC8 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/02 23:12:06 5C4AC8 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/02 23:12:08 5C4AC8 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/02 23:12:08 5C4AC8 r sci0 [internal] IFD: Card succesfully activated
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Receive succesful
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Receive succesful
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:12:09 5C4AC8 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:12:20 5C4AC8 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/02 23:12:20 5C4AC8 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/02 23:12:20 5C4AC8 r sci0 [internal] IFD: Transmit:
    2015/01/02 23:12:20 5C4AC8 r sci0 [internal] IFD: Transmit succesful
    2015/01/02 23:12:20 5C4AC8 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/02 23:12:20 5C4AC8 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/02 23:12:30 5C4AC8 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/02 23:12:30 5C4AC8 r sci0 [internal] card system not supported
    2015/01/02 23:12:30 5C4AC8 r sci0 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
    2015/01/02 23:12:30 5C4AC8 r sci0 [internal] card initializing error

AbrahaM · 2 Stycznia 2015

Podaję log z binarki qbox multipatch

od razu lepiej, leci do deva, "widać więcej", może coś z tego będzie.

2 Stycznia 2015

Poważnie? Brzmi obiecująco. Czekam na solucje. Baaaardzo dziękuję za zainteresowanie. Pozdrawiam

AbrahaM · 2 Stycznia 2015

Poważnie? Brzmi obiecująco. Czekam na solucje. Baaaardzo dziękuję za zainteresowanie. Pozdrawiam

powiem tak, sam (a nie jestem tak "obcykany" jak developer) już gołym okiem widzę najmniej jeden problem,

2015/01/02 23:10:10 5BC2C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00

w wypadku opticuma mogą być dwa problemy

1. jakiś błąd, który wychodzi u was lub "jest u was" w systemie w obsłudze sci0

2. jest ryzyko, że wbudowany czytnik jest pozbawiony możliwości obsługi innych systemów niż conax, ale wtedy "nie powinien" iść w wicardd

3. jak się zaopatrzysz w phoenixa, mogę spróbować, posterować jak masz go odpalić, przynajmniej byś miał przećwiczone. Niestety skoro nie macie ssl, to i możecie nie mieć plików systemowych potrzebnych do obsługi phoenixów. Więc może być jazda z ich ręcznym wgrywaniem, zgadywaniem gdzie je wgrać, liczeniem na to, że "zaskoczą". Patrząc po datach, to masz system "zapóźniony" o jakieś 20 miesięcy w stosunku do tego co jest u nas.

3 Stycznia 2015

Witam,

Dziękuję za kolejną binarkę. Niestety nadal to samo - error. Poniżej log. W załączniku dopinam mój plik smartcard.ko. Może się przyda.


    2015/01/03 16:30:41 582F18 h sci0 [internal] creating thread for device /dev/sci0
    2015/01/03 16:30:41 5C04C0 r data from add_job action=8 client r sci0
    2015/01/03 16:30:41 5C04C0 r sci0 [internal] IFD: Opening device /dev/sci0
    2015/01/03 16:30:41 5C04C0 r sci0 [internal] IFD: Device /dev/sci0 succesfully opened
    2015/01/03 16:30:41 5C04C0 r sci0 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
    2015/01/03 16:30:42 5C04C0 r sci0 [internal] card detected
    2015/01/03 16:30:42 5C04C0 r add reader job action 4 queue length 1 sci0
    2015/01/03 16:30:42 5C04C0 r sci0 [internal] IFD: Activating card
    2015/01/03 16:30:42 5C04C0 r sci0 [internal] IFD: Is card present?
    2015/01/03 16:30:42 5C04C0 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/03 16:30:46 5C04C0 r sci0 [internal] IFD: This card uses direct convention
    2015/01/03 16:30:46 5C04C0 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/03 16:30:46 5C04C0 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/03 16:30:46 5C04C0 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/03 16:30:46 5C04C0 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/03 16:30:49 5C04C0 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/03 16:30:49 5C04C0 r sci0 [internal] IFD: Card succesfully activated
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Receive succesful
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Receive succesful
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:30:50 5C04C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:31:00 5C04C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:31:00 5C04C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:31:00 5C04C0 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:31:00 5C04C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:31:00 5C04C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:31:00 5C04C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:31:11 5C04C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/03 16:31:11 5C04C0 r sci0 [internal] card system not supported
    2015/01/03 16:31:11 5C04C0 r sci0 [internal] Normal mode failed, reverting to Deprecated Mode
    2015/01/03 16:31:11 5C04C0 r sci0 [internal] IFD: Activating card
    2015/01/03 16:31:11 5C04C0 r sci0 [internal] IFD: Is card present?
    2015/01/03 16:31:11 5C04C0 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/03 16:31:15 5C04C0 r sci0 [internal] IFD: This card uses direct convention
    2015/01/03 16:31:15 5C04C0 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/03 16:31:15 5C04C0 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/03 16:31:15 5C04C0 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/03 16:31:16 5C04C0 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/03 16:31:18 5C04C0 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/03 16:31:18 5C04C0 r sci0 [internal] IFD: Card succesfully activated
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Receive succesful
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Receive succesful
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:31:19 5C04C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:31:30 5C04C0 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:31:30 5C04C0 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:31:30 5C04C0 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:31:30 5C04C0 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:31:30 5C04C0 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:31:30 5C04C0 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:31:41 5C04C0 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/03 16:31:41 5C04C0 r sci0 [internal] card system not supported
    2015/01/03 16:31:41 5C04C0 r sci0 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
    2015/01/03 16:31:41 5C04C0 r sci0 [internal] card initializing error
    2015/01/03 16:31:59 582F18 h sci0 [internal] creating thread for device /dev/sci0
    2015/01/03 16:31:59 2A206560 r data from add_job action=8 client r sci0
    2015/01/03 16:31:59 2A206560 r sci0 [internal] IFD: Opening device /dev/sci0
    2015/01/03 16:31:59 2A206560 r sci0 [internal] IFD: Device /dev/sci0 succesfully opened
    2015/01/03 16:31:59 2A206560 r sci0 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
    2015/01/03 16:32:00 2A206560 r sci0 [internal] card detected
    2015/01/03 16:32:00 2A206560 r add reader job action 4 queue length 1 sci0
    2015/01/03 16:32:00 2A206560 r sci0 [internal] IFD: Activating card
    2015/01/03 16:32:00 2A206560 r sci0 [internal] IFD: Is card present?
    2015/01/03 16:32:00 2A206560 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/03 16:32:04 2A206560 r sci0 [internal] IFD: This card uses direct convention
    2015/01/03 16:32:04 2A206560 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/03 16:32:04 2A206560 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/03 16:32:04 2A206560 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/03 16:32:05 2A206560 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/03 16:32:07 2A206560 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/03 16:32:07 2A206560 r sci0 [internal] IFD: Card succesfully activated
    2015/01/03 16:32:08 2A206560 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Receive succesful
    2015/01/03 16:32:08 2A206560 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Receive succesful
    2015/01/03 16:32:08 2A206560 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/03 16:32:08 2A206560 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:32:08 2A206560 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:32:19 2A206560 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:32:19 2A206560 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:32:19 2A206560 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:32:19 2A206560 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:32:19 2A206560 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:32:19 2A206560 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:32:30 2A206560 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/03 16:32:30 2A206560 r sci0 [internal] card system not supported
    2015/01/03 16:32:30 2A206560 r sci0 [internal] Normal mode failed, reverting to Deprecated Mode
    2015/01/03 16:32:30 2A206560 r sci0 [internal] IFD: Activating card
    2015/01/03 16:32:30 2A206560 r sci0 [internal] IFD: Is card present?
    2015/01/03 16:32:30 2A206560 r sci0 [internal] IFD: Sent reader setting at cardinit T=0 fs=3 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
    2015/01/03 16:32:34 2A206560 r sci0 [internal] IFD: This card uses direct convention
    2015/01/03 16:32:34 2A206560 r sci0 [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
    2015/01/03 16:32:34 2A206560 r sci0 [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
    2015/01/03 16:32:34 2A206560 r sci0 [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/01/03 16:32:34 2A206560 r sci0 [internal] IFD: Sent reader settings T=0 fs=5 ETU=372 WWT=144000 CWT=0 BWT=0 EGT=1 clock=0 check=1 P=5 I=25 U=1
    2015/01/03 16:32:37 2A206560 r sci0 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/01/03 16:32:37 2A206560 r sci0 [internal] IFD: Card succesfully activated
    2015/01/03 16:32:38 2A206560 r sci0 [internal] detect seca/nagra tunneled card
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Receive succesful
    2015/01/03 16:32:38 2A206560 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Receive succesful
    2015/01/03 16:32:38 2A206560 r sci0 [internal] TRACE: ERROR: Protocol_T0_ExchangeTPDU: Received unexpected character: 00
    2015/01/03 16:32:38 2A206560 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:32:38 2A206560 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:32:48 2A206560 r sci0 [internal] IFD: Setting timeout to 13 ETU (967 us)
    2015/01/03 16:32:48 2A206560 r sci0 [internal] IFD: Transmit size 5 bytes, expected len 11 bytes, delay 0 us, timeout=967 us
    2015/01/03 16:32:48 2A206560 r sci0 [internal] IFD: Transmit:
    2015/01/03 16:32:48 2A206560 r sci0 [internal] IFD: Transmit succesful
    2015/01/03 16:32:48 2A206560 r sci0 [internal] IFD: Setting timeout to 144000 ETU (10713600 us)
    2015/01/03 16:32:48 2A206560 r sci0 [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=10713600 us
    2015/01/03 16:32:59 2A206560 r sci0 [internal] TRACE: ERROR: Protocol_T0_Command returns error
    2015/01/03 16:32:59 2A206560 r sci0 [internal] card system not supported
    2015/01/03 16:32:59 2A206560 r sci0 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
    2015/01/03 16:32:59 2A206560 r sci0 [internal] card initializing error

... Patrząc po datach, to masz system "zapóźniony" o jakieś 20 miesięcy w stosunku do tego co jest u nas.

Heh, dlatego wysyłałem do Was maila z zapytaniem o możliwość ingerencji w soft i czy jest opcja odświeżenia 9500HD, ale raczej nie.

smartcard.zip

AbrahaM · 3 Stycznia 2015

Witam,

Dziękuję za kolejną binarkę. Niestety nadal to samo - error. Poniżej log. W załączniku dopinam mój plik smartcard.ko. Może się przyda.

czy jesteś absolutnie pewien, że naprawdę działasz na binarkach które dostajesz, a nie na jakieś innej? zrób restart oscama i skopiuj część z jego startu, wystarczy to co jest na samym początku:

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Sat Jan  3 16:57:25 2015
-------------------------------------------------------------------------------
2015/01/03 16:57:25        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r10107 (i486-linux-gnu-ssl-cośtamdalej)

Heh, dlatego wysyłałem do Was maila z zapytaniem o możliwość ingerencji w soft i czy jest opcja odświeżenia 9500HD, ale raczej nie.

ano nie za bardzo, już większe szanse są na odpalenie phoenixów, choć to też wcale nie jest pewne.

Nie czyta karty cyfry 0100

Rekomendowane odpowiedzi

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Gość fazik83

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Dołącz do dyskusji