tux Posted February 10, 2014 Share Posted February 10, 2014 OScam wersja dla procesorów i686 kompilowana na PLD Linux z myślą o PLD Linux. Ponieważ miałem już dość ciągłych ręcznych podmian plików, robienia symlinków, restartów itp. przygotowałem sobie skrypt tworzący gotową paczkę .rpm wraz ze skryptem do SysVinit/chkconfig. EDIT tux 2014-02-11: poprawiony skrypt startujący OSCam - teraz korzysta ze skryptów systemu; dodana wersja 9300 z Clockfix + Webif "przeszczepiony" z 9530; dodana wersja 9300 z Clockfix; dodana wersja 9300 trunk; dodana wersja 9200 trunk → stabilnie pracowała u mnie 48 dni; dodana najnowsza na dzień 11.02.2014 wersja 9530. Web interface support: yes Touch interface support: yes SSL support: yes DVB API support: no Anti-cascading support: yes Irdeto guessing: yes Debug mode: yes Monitor: yes Loadbalancing support: yes CW Cycle Check support: yes LCD support: yes LED support: yes IPv6 support: no Clockfix with realtime clock: yes Cache exchange support: yes --- camd 3.3x: no camd 3.5 UDP: no camd 3.5 TCP: no newcamd: no CCcam: yes CCcam share: yes Pandora: no ghttp: no gbox: no radegast: no serial: no constant CW: no --- Reader support: yes --- Nagra: yes Irdeto: yes Conax: yes Cryptoworks: yes Seca: yes Viaccess: yes NDS Videoguard: yes DRE Crypt: no - no EMM support! TONGFANG: no - no EMM support! Bulcrypt: yes Griffin: no - no EMM support! DGCrypt: no - no EMM support! --- cardreader_phoenix: yes cardreader_internal_azbox: no cardreader_internal_coolapi: no cardreader_internal_sci: no cardreader_sc8in1: no cardreader_mp35: no cardreader_smargo: no cardreader_pcsc: no cardreader_smartreader: no cardreader_db2com: no cardreader_stapi: no cardreader_stinger: no oscam-1.20.server-svn9200.i686.rpm oscam-1.20.server-svn9300.i686.rpm oscam-1.20.server-svn9300-Clockfix.i686.rpm oscam-1.20.server-svn9530.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted February 20, 2014 Author Share Posted February 20, 2014 OScam r9540 oscam-1.20.server-svn9540.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted March 3, 2014 Author Share Posted March 3, 2014 OScam-1.20-unstable_svn9300-i686-pld-linux-ssl-clockfix9300-multibackport_v4-multipatch_v3_defaultstweak_v1 Oscam r9553 oscam-1.20.server-svn9300.2014.03.03.i686.rpm oscam-1.20.server-svn9553.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted March 22, 2014 Author Share Posted March 22, 2014 oscam-1.20.server-svn9578 oscam-1.20.server-svn9578.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted March 27, 2014 Author Share Posted March 27, 2014 oscam-1.20.server-svn9592 oscam-1.20.server-svn9592.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted March 27, 2014 Author Share Posted March 27, 2014 oscam-1.20.server-svn9596 oscam-1.20.server-svn9596.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted March 28, 2014 Author Share Posted March 28, 2014 oscam-1.20.server-svn9602 Przy okazji tej wersji poprawiony został skrypt od startowania OScama. oscam-1.20.server-svn9602.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted March 30, 2014 Author Share Posted March 30, 2014 oscam-1.20.server-svn9611 oscam-1.20.server-svn9611.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted April 2, 2014 Author Share Posted April 2, 2014 oscam-1.20.server-svn9614 oscam-1.20.server-svn9614.src.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted April 2, 2014 Author Share Posted April 2, 2014 oscam-1.20.server-svn9616 oscam-1.20.server-svn9616.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted April 7, 2014 Author Share Posted April 7, 2014 oscam-1.20.server-svn9632 oscam-1.20.server-svn9632.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted April 7, 2014 Author Share Posted April 7, 2014 oscam-1.20.server-svn9639 oscam-1.20.server-svn9639.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted April 7, 2014 Author Share Posted April 7, 2014 oscam-1.20.server-svn9641 oscam-1.20.server-svn9641.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted April 8, 2014 Author Share Posted April 8, 2014 oscam-1.20.server-svn9642 oscam-1.20.server-svn9642.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted April 9, 2014 Author Share Posted April 9, 2014 oscam-1.20.server-svn9653 oscam-1.20.server-svn9653.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted April 19, 2014 Author Share Posted April 19, 2014 oscam-1.20.server-svn9664 Niestety zakład energetyczny zafundował mi restart serwerowni (ponad 2h brak prądu i UPS nie dał rady) daję nowszego OSCama. Póki co ten siedzi u mnie na serwerze do czasu jak nie poinformuję, że nastąpiła zmiana :) EDIT tux: W załączniku screen z działania OSCama. Działa już 23 dni bez problemów. Testy trwają dalej :) oscam-1.20.server-svn9664.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted June 15, 2014 Author Share Posted June 15, 2014 W związku z brutalnym przerwaniem testów przez zakład energetyczny po 45dniach pracy wersja 9664 zostaje zastąpiona 9764 oscam-1.20.server-svn9764 oscam-1.20.server-svn9764.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted August 2, 2014 Author Share Posted August 2, 2014 oscam-1.20.server-svn9812 oscam-1.20.server-svn9812.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted August 12, 2014 Author Share Posted August 12, 2014 oscam-1.20.server-svn9827 oscam-1.20.server-svn9827.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted September 11, 2014 Author Share Posted September 11, 2014 oscam-1.20.server-svn9842 - testowany dłużej - działa OK; oscam-1.20.server-svn9847 (bez ClockFix) - testy rozpoczęte; oscam-1.20.server-svn9842.i686.rpm oscam-1.20.server-svn9847.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted September 14, 2014 Author Share Posted September 14, 2014 oscam-1.20.server-svn9848 (z wycofanymi zmianami z 9843, 9831, 9828); Testy rozpoczęte. Pierwsze co rzuciło się od razu w oczy to brak NOka oraz Timeout podczas restartu OSCam jak miało to miejsce powyżej 9842. EDIT tux: Oscam pracuje stabilnie od 17 dni i prawie 18 godzin. W załączniku screen. oscam-1.20.server-svn9848.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted November 14, 2014 Author Share Posted November 14, 2014 +------------------------------------------------------------------------------- | OSCam ver: 1.20-unstable_svn rev: 10000 target: i686-pld-linux-ssl | Reverts: 9972, 9971, 9963, 9962, 9957, 9949, 9844, 9832, 9829 | Tools: | CROSS = | CC = gcc | Settings: | CONF_DIR = /etc/oscam | CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections | CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition | CFLAGS = -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 | LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 | LIBS = -lssl -lcrypto -lpthread -ldl | UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 | Config: | Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL IRDETO_GUESSING CS_ANTICASC | WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK LCDSUPPORT LEDSUPPORT | Protocols: CAMD35_TCP CCCAM CCCSHARE | Readers : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD BULCRYPT | CardRdrs : PHOENIX | Compiler : gcc (PLD-Linux) 4.8.3 20140522 (release) | Binary : Distribution/oscam-1.20-unstable_svn10000-i686-pld-linux-ssl +------------------------------------------------------------------------------- EDIT tux: Póki co pracuje 50 okresów po 24 godziny :) EDIT tux: Póki co pracuje 60 okresów po 24 godziny :) oscam-1.20.server-svn10000.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted April 7, 2015 Author Share Posted April 7, 2015 +------------------------------------------------------------------------------- | OSCam ver: 1.20-unstable_svn rev: 10572 target: i686-pld-linux-ssl | Reverts: 10380, 9972, 9971, 9963, 9962, 9957, 9949 | Patches: conax_rsa2.patch, buffsize500k.patch, z-maxservices.patch | Tools: | CROSS = | CC = gcc | Settings: | CONF_DIR = /etc/oscam | CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections | CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition | CFLAGS = -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 | LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 | LIBS = -lssl -lcrypto -lpthread -ldl -lrt | UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 | Config: | Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL IRDETO_GUESSING CS_ANTICASC | WITH_DEBUGMODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK LCDSUPPORT LEDSUPPORT | Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX | Readers : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD BULCRYPT | CardRdrs : PHOENIX | Compiler : gcc (PLD-Linux) 4.9.2 20141216 (release) | Config : build/i686-pld-linux-ssl/config.mak | Binary : Distribution/oscam-1.20-unstable_svn10572-i686-pld-linux-ssl +------------------------------------------------------------------------------- Poprzednia wersja pracowała ponad 120 dni. Niestety zakład energetyczny odciął mnie na ponad 6h od energii w Niedzielę Wielkanocną i nawet zasilacz buforowy nie dał rady. Dlatego korzystając z okazji skompilowałem nową wersję i zrobiłem upgrade na serwerze. oscam-1.20.server-svn10572.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted June 10, 2015 Author Share Posted June 10, 2015 +------------------------------------------------------------------------------- | OSCam ver: 1.20-unstable_svn rev: 10702 target: i686-pld-linux-ssl | Patches: buffsize500k.patch, z-maxservices.patch | Tools: | CROSS = | CC = gcc | Settings: | CONF_DIR = /etc/oscam | CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections | CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition | CFLAGS = -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 | LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 | LIBS = -lssl -lcrypto -lpthread -ldl -lrt | UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 | Config: | Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL IRDETO_GUESSING CS_ANTICASC | WITH_DEBUGMODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK LCDSUPPORT LEDSUPPORT | Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX | Readers : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD BULCRYPT | CardRdrs : PHOENIX | Compiler : gcc (PLD-Linux) 4.9.2 20141216 (release) | Config : build/i686-pld-linux-ssl/config.mak | Binary : Distribution/oscam-1.20-unstable_svn10702-i686-pld-linux-ssl +------------------------------------------------------------------------------- oscam-1.20.server-svn10702.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted June 11, 2015 Author Share Posted June 11, 2015 +------------------------------------------------------------------------------- | OSCam ver: 1.20-unstable_svn rev: 10710 target: i686-pld-linux-ssl | Reverts: 10634 | Patches: buffsize500k.patch, z-maxservices.patch | Tools: | CROSS = | CC = gcc | Settings: | CONF_DIR = /etc | CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections | CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition | CFLAGS = -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 | LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 | LIBS = -lssl -lcrypto -lpthread -ldl | UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 | Config: | Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL IRDETO_GUESSING CS_ANTICASC WITH_DEBUG | MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK LCDSUPPORT LEDSUPPORT | Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX | Readers : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD BULCRYPT | CardRdrs : PHOENIX | Compiler : gcc (PLD-Linux) 4.9.2 20141216 (release) | Config : build/i686-pld-linux-ssl/config.mak | Binary : Distribution/oscam-1.20-unstable_svn10710-i686-pld-linux-ssl +------------------------------------------------------------------------------- oscam-1.20.server-svn10710.i686.rpm Quote Link to comment Share on other sites More sharing options...
tux Posted February 20, 2017 Author Share Posted February 20, 2017 +------------------------------------------------------------------------------- | OSCam ver: 1.20-unstable_svn rev: 10710 target: i686-pld-linux-ssl | Reverts: 10634 | Patches: buffsize500k.patch, z-maxservices.patch | Tools: | CROSS = | CC = gcc | Settings: | CONF_DIR = /etc | CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections | CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition | CFLAGS = -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 | LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 | LIBS = -lssl -lcrypto -lpthread -ldl | UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 | Config: | Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL IRDETO_GUESSING CS_ANTICASC WITH_DEBUG | MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK LCDSUPPORT LEDSUPPORT IPV6SUPPORT | Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX | Readers : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD BULCRYPT | CardRdrs : PHOENIX | Compiler : gcc (PLD-Linux) 4.9.2 20141216 (release) | Config : build/i686-pld-linux-ssl/config.mak | Binary : Distribution/oscam-1.20-unstable_svn10710-i686-pld-linux-ssl +------------------------------------------------------------------------------- oscam-1.20.server-svn11360.i686.rpm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.