ITI-2850st obsługa dvb-t

[tux]

Faktycznie był mały błąd w warunku przy linkowaniu frontend. Po aktualizacji powinno działać bez problemu.

[Gość fox]

Niestety u mnie dalej lipa...

Teraz już skanuje i znajduje kanały ale żaden nie działa: "X Dostrojenie nie udało się!". Później też: "Brak danych na transponderze (Przekroczony czas czytania PAT)".

[Gość luckypeter]

Z jakiej serii masz tego 2849 (DFKB czy DGBC) ?

[Gość fox]

DGBC

[Gość luckypeter]

I dlatego masz problem!

2850 CSTA i 2849 DFKB mają dokładnie tą samą płytę główną i nie mia z nimi problemów.

Natomiast 2849 DGBC to zupełnie inna wersja płyty i stąd problemy (nie działa m. in. złączę scart)

 

[kieliszek]

Potwierdzam działanie DVB-T na DFKB.

Dzięki serdeczne!

[lappys41]

where i can find info

Same as in 5800 (Info can be found on the Internet)

counting from the left

-3.3V

-TXD

-RXD

-GND

[lappys41]

 

i want this below currect u-boot my box stuck on boot

thanks/regards

 

nBOX ADB28xx by plfreebox@gmail.com (32-bit mode)

U-BOOT 1.3.1 (JUN 17 2013 - 11:32:30) - stm_0057

DRAM: 256 MiB
Error: Number of sectors (127) >

NAND: 128 Mib

*** Warning - bad CRC

In: serial
Out: serial
MB618>
 

[lappys41]

On 12/15/2013 at 5:44 PM, amigos26 said:

Here you go

 

nBOX ADB28xx by plfreebox@gmail.com  [32-bit mode]

U-Boot 1.3.1 (Aug  5 2012 - 10:17:06) - stm24_0057

DRAM:  256 MiB
NOR:     4 MiB
NAND:   64 MiB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  3  2  1  0 
(Re)start USB...
USB:   scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **
** Bad partition 1 **
## Booting image at 80060000 ...
Bad Magic Number

NAND read: device 0 offset 0x0, size 0x300000


Reading data from 0x0 --   0% complete.
Reading data from 0x7a00 --   1% complete.
Reading data from 0xf400 --   2% complete.
Reading data from 0x17000 --   3% complete.
Reading data from 0x1ea00 --   4% complete.
Reading data from 0x26600 --   5% complete.
Reading data from 0x2e000 --   6% complete.
Reading data from 0x35c00 --   7% complete.
Reading data from 0x3d600 --   8% complete.
Reading data from 0x45000 --   9% complete.
Reading data from 0x4cc00 --  10% complete.
Reading data from 0x54600 --  11% complete.
Reading data from 0x5c200 --  12% complete.
Reading data from 0x63c00 --  13% complete.
Reading data from 0x6b800 --  14% complete.
Reading data from 0x73200 --  15% complete.
Reading data from 0x7ae00 --  16% complete.
Reading data from 0x82800 --  17% complete.
Reading data from 0x8a200 --  18% complete.
Reading data from 0x91e00 --  19% complete.
Reading data from 0x99800 --  20% complete.
Reading data from 0xa1400 --  21% complete.
Reading data from 0xa8e00 --  22% complete.
Reading data from 0xb0a00 --  23% complete.
Reading data from 0xb8400 --  24% complete.
Reading data from 0xbfe00 --  25% complete.
Reading data from 0xc7a00 --  26% complete.
Reading data from 0xcf400 --  27% complete.
Reading data from 0xd7000 --  28% complete.
Reading data from 0xdea00 --  29% complete.
Reading data from 0xe6600 --  30% complete.
Reading data from 0xee000 --  31% complete.
Reading data from 0xf5c00 --  32% complete.
Reading data from 0xfd600 --  33% complete.
Reading data from 0x105000 --  34% complete.
Reading data from 0x10cc00 --  35% complete.
Reading data from 0x114600 --  36% complete.
Reading data from 0x11c200 --  37% complete.
Reading data from 0x123c00 --  38% complete.
Reading data from 0x12b800 --  39% complete.
Reading data from 0x133200 --  40% complete.
Reading data from 0x13ae00 --  41% complete.
Reading data from 0x142800 --  42% complete.
Reading data from 0x14a200 --  43% complete.
Reading data from 0x151e00 --  44% complete.
Reading data from 0x159800 --  45% complete.
Reading data from 0x161400 --  46% complete.
Reading data from 0x168e00 --  47% complete.
Reading data from 0x170a00 --  48% complete.
Reading data from 0x178400 --  49% complete.
Reading data from 0x17fe00 --  50% complete.
Reading data from 0x187a00 --  51% complete.
Reading data from 0x18f400 --  52% complete.
Reading data from 0x197000 --  53% complete.
Reading data from 0x19ea00 --  54% complete.
Reading data from 0x1a6600 --  55% complete.
Reading data from 0x1ae000 --  56% complete.
Reading data from 0x1b5c00 --  57% complete.
Reading data from 0x1bd600 --  58% complete.
Reading data from 0x1c5000 --  59% complete.
Reading data from 0x1ccc00 --  60% complete.
Reading data from 0x1d4600 --  61% complete.
Reading data from 0x1dc200 --  62% complete.
Reading data from 0x1e3c00 --  63% complete.
Reading data from 0x1eb800 --  64% complete.
Reading data from 0x1f3200 --  65% complete.
Reading data from 0x1fae00 --  66% complete.
Reading data from 0x202800 --  67% complete.
Reading data from 0x20a200 --  68% complete.
Reading data from 0x211e00 --  69% complete.
Reading data from 0x219800 --  70% complete.
Reading data from 0x221400 --  71% complete.
Reading data from 0x228e00 --  72% complete.
Reading data from 0x230a00 --  73% complete.
Reading data from 0x238400 --  74% complete.
Reading data from 0x23fe00 --  75% complete.
Reading data from 0x247a00 --  76% complete.
Reading data from 0x24f400 --  77% complete.
Reading data from 0x257000 --  78% complete.
Reading data from 0x25ea00 --  79% complete.
Reading data from 0x266600 --  80% complete.
Reading data from 0x26e000 --  81% complete.
Reading data from 0x275c00 --  82% complete.
Reading data from 0x27d600 --  83% complete.
Reading data from 0x285000 --  84% complete.
Reading data from 0x28cc00 --  85% complete.
Reading data from 0x294600 --  86% complete.
Reading data from 0x29c200 --  87% complete.
Reading data from 0x2a3c00 --  88% complete.
Reading data from 0x2ab800 --  89% complete.
Reading data from 0x2b3200 --  90% complete.
Reading data from 0x2bae00 --  91% complete.
Reading data from 0x2c2800 --  92% complete.
Reading data from 0x2ca200 --  93% complete.
Reading data from 0x2d1e00 --  94% complete.
Reading data from 0x2d9800 --  95% complete.
Reading data from 0x2e1400 --  96% complete.
Reading data from 0x2e8e00 --  97% complete.
Reading data from 0x2f0a00 --  98% complete.
Reading data from 0x2f8400 --  99% complete.
Reading data from 0x2ffe00 -- 100% complete.
3145728 bytes read: OK
## Booting image at 80060000 ...
   Image Name:   Linux-2.6.32.59_stm24_0211
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1928822 Bytes =   1.8 MiB
   Load Address: 80801000
   Entry Point:  80802000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2 mem=256m coprocessor_mem=4m@0x40000000,4m@0x40400000 nwhwconf=device:eth0,hwaddr:00:03:91:F7:E6:B7 init=/bin/devinit - 0x00000000 - 0 ...


INIT: version 2.86 booting

Mount /dev in tmpfs
Copying device nodes to /dev
init autofs4
boxtype ADB2850
NAND skipped
Mounting local filesystems...
mount: mounting LABEL=records on /hdd failed: No such file or directory
mount: mounting LABEL=data on /media/data failed: No such file or directory
Cleaning /tmp /var/run.
Hostname: tuxish-Box.
init stmfb
VIDEO:scart
load a/v firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
base_address 0x40000000
seeking to 57a40
seeking to 120378
seeking to 1203b0
seeking to 1203e8
seeking to 12f230
seeking to 12f23c
seeking to 12f248
seeking to 1510c0
seeking to 14f0ac
seeking to 151100
init embx
init AVS
init player
init frontends DVB-S
init drivers
init CEC
init smartcard
init remote control
init nbox remote control
lircd-0.9.0[1434]: lircd(default) ready, using /var/run/lirc/lircd

Starting portmap daemon...Model: adb2850
vBoxType: 13
Input device name: "TDT RC event driver"
Selected Remote: NBOX RemoteControl
RemoteControl Map: E2 code
Supports Long KeyPress: 0
lircd-0.9.0[1434]: accepted new client on /var/run/lirc/lircd

.
showSinglePic /boot/logo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Starting FTP server: vsftpd.
Start network
Reconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured
udhcpc (v1.21.1) started
Sending discover...
Sending select for 192.168.0.11...
Lease of 192.168.0.11 obtained, lease time 86400
route: SIOCDELRT: No such process
adding dns 95.160.170.92
adding dns 88.156.222.92
adding dns 8.8.8.8
done.
$Starting sshd:ok
15 Dec 13:09:41 ntpdate[1531]: step time server 31.216.56.5 offset 440424536.895353 sec
Load E2
Start SoftCam
crond[1541]: crond: crond (busybox 1.21.1) started, log level 8

PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
12288k total video mem
4188k usable video mem
2568kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
couldn't open LCD - load lcd.ko!
lcd buffer 0x7761b8 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[font] initializing lib...
[font] loading fonts...
[font] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "TDT RC event driver" is a remotecontrol
failed to open /dev/input/event1
Input device "" is a remotecontrol
failed to open /dev/input/event2
failed to open /dev/input/event3
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (36) Stream server
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 4425 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) No such device
opening frontend 2
close frontend 2
boxtype detection BOX_SH4

found 1 adapter, 2 frontends(2 sim) and 2 demux, boxtype 33
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait9.png
found 8 spinner!

executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
Reading satellites.xml
Reading terrestrial.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
eDVBResourceManager::setFrontendSlotInformations .. assigned 2 socket informations, but 1 registered frontends!
slot: 0 configmode: simple
sec config completed
[infoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 1
205 entries in Bouquet userbouquet.dbe00.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 206
179 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.dbe5f.tv 385
182 entries in Bouquet userbouquet.dbe5f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2a.tv 567
67 entries in Bouquet userbouquet.dbe2a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe3d.tv 634
51 entries in Bouquet userbouquet.dbe3d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 685
68 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe23.tv 753
151 entries in Bouquet userbouquet.dbe23.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 904
201 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 1105
81 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 1186
83 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0f.tv 1269
94 entries in Bouquet userbouquet.dbe0f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2c.tv 1357
182 entries in Bouquet userbouquet.dbe2c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe37.tv 1534
54 entries in Bouquet userbouquet.dbe37.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1587
52 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 1639
45 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 1684
148 entries in Bouquet userbouquet.dbe08.tv
loading bouquet... /etc/enigma2/userbouquet.dbe12.tv 1832
74 entries in Bouquet userbouquet.dbe12.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2b.tv 1906
70 entries in Bouquet userbouquet.dbe2b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 1976
227 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.dbe10.tv 2202
24 entries in Bouquet userbouquet.dbe10.tv
loading bouquet... /etc/enigma2/userbouquet.dbe13.tv 2226
131 entries in Bouquet userbouquet.dbe13.tv
loading bouquet... /etc/enigma2/userbouquet.dbe16.tv 2357
226 entries in Bouquet userbouquet.dbe16.tv
loading bouquet... /etc/enigma2/userbouquet.dbe18.tv 2582
73 entries in Bouquet userbouquet.dbe18.tv
loading bouquet... /etc/enigma2/userbouquet.dbe14.tv 2655
39 entries in Bouquet userbouquet.dbe14.tv
loading bouquet... /etc/enigma2/userbouquet.dbe15.tv 2694
81 entries in Bouquet userbouquet.dbe15.tv
loading bouquet... /etc/enigma2/userbouquet.dbe81.tv 2775
56 entries in Bouquet userbouquet.dbe81.tv
loading bouquet... /etc/enigma2/userbouquet.dbe17.tv 2831
54 entries in Bouquet userbouquet.dbe17.tv
loading bouquet... /etc/enigma2/userbouquet.dbe19.tv 2885
49 entries in Bouquet userbouquet.dbe19.tv
loading bouquet... /etc/enigma2/userbouquet.dbe20.tv 2933
66 entries in Bouquet userbouquet.dbe20.tv
loading bouquet... /etc/enigma2/userbouquet.dbe21.tv 2999
28 entries in Bouquet userbouquet.dbe21.tv
loading bouquet... /etc/enigma2/userbouquet.dbe22.tv 3027
22 entries in Bouquet userbouquet.dbe22.tv
loading bouquet... /etc/enigma2/userbouquet.dbe24.tv 3049
38 entries in Bouquet userbouquet.dbe24.tv
loading bouquet... /etc/enigma2/userbouquet.dbe25.tv 3087
42 entries in Bouquet userbouquet.dbe25.tv
loading bouquet... /etc/enigma2/userbouquet.dbe26.tv 3128
40 entries in Bouquet userbouquet.dbe26.tv
loading bouquet... /etc/enigma2/userbouquet.dbe27.tv 3168
162 entries in Bouquet userbouquet.dbe27.tv
loading bouquet... /etc/enigma2/userbouquet.dbe28.tv 3330
75 entries in Bouquet userbouquet.dbe28.tv
loading bouquet... /etc/enigma2/userbouquet.dbe29.tv 3405
23 entries in Bouquet userbouquet.dbe29.tv
loading bouquet... /etc/enigma2/userbouquet.dbe30.tv 3428
19 entries in Bouquet userbouquet.dbe30.tv
loading bouquet... /etc/enigma2/userbouquet.dbe31.tv 3447
43 entries in Bouquet userbouquet.dbe31.tv
loading bouquet... /etc/enigma2/userbouquet.dbe32.tv 3489
164 entries in Bouquet userbouquet.dbe32.tv
loading bouquet... /etc/enigma2/userbouquet.dbe33.tv 3653
22 entries in Bouquet userbouquet.dbe33.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0e.tv 3675
10 entries in Bouquet userbouquet.dbe0e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0a.tv 3685
46 entries in Bouquet userbouquet.dbe0a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 3731
3 entries in Bouquet userbouquet.dbe0b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe65.tv 3734
37 entries in Bouquet userbouquet.dbe65.tv
loading bouquet... /etc/enigma2/userbouquet.dbe7f.tv 3771
328 entries in Bouquet userbouquet.dbe7f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe6b.tv 4086
12 entries in Bouquet userbouquet.dbe6b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe69.tv 4096
1 entries in Bouquet userbouquet.dbe69.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 4097
0 entries in Bouquet userbouquet.favourites.tv
49 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 1
17 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe01.radio 18
17 entries in Bouquet userbouquet.dbe01.radio
loading bouquet... /etc/enigma2/userbouquet.dbe04.radio 35
12 entries in Bouquet userbouquet.dbe04.radio
loading bouquet... /etc/enigma2/userbouquet.dbe05.radio 47
12 entries in Bouquet userbouquet.dbe05.radio
loading bouquet... /etc/enigma2/userbouquet.dbe06.radio 59
33 entries in Bouquet userbouquet.dbe06.radio
loading bouquet... /etc/enigma2/userbouquet.dbe07.radio 92
51 entries in Bouquet userbouquet.dbe07.radio
loading bouquet... /etc/enigma2/userbouquet.dbe09.radio 143
62 entries in Bouquet userbouquet.dbe09.radio
loading bouquet... /etc/enigma2/userbouquet.dbe0c.radio 204
27 entries in Bouquet userbouquet.dbe0c.radio
loading bouquet... /etc/enigma2/userbouquet.dbe10.radio 231
10 entries in Bouquet userbouquet.dbe10.radio
loading bouquet... /etc/enigma2/userbouquet.dbe11.radio 241
26 entries in Bouquet userbouquet.dbe11.radio
loading bouquet... /etc/enigma2/userbouquet.dbe12.radio 267
20 entries in Bouquet userbouquet.dbe12.radio
loading bouquet... /etc/enigma2/userbouquet.dbe13.radio 287
17 entries in Bouquet userbouquet.dbe13.radio
loading bouquet... /etc/enigma2/userbouquet.dbe14.radio 304
60 entries in Bouquet userbouquet.dbe14.radio
loading bouquet... /etc/enigma2/userbouquet.dbe15.radio 364
37 entries in Bouquet userbouquet.dbe15.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 401
0 entries in Bouquet userbouquet.favourites.radio
15 entries in Bouquet bouquets.radio
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[font] adding font /usr/local/share/fonts/cool.ttf...OK (Regular)
[font] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[font] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Console)
[font] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed)
[font] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs)
[font] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
Selected keymap does not exist!
Activating language Polski
Renumbering...
[ePopen] command: ip -o addr show dev eth0
Plugin  Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[eSocketMMIHandler] created successfully
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss any bestfit policy auto
setMode - port: Scart mode: PAL rate: 50Hz
updateColor:  Scart
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
starting hotplug handler
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[EPGC] /hdd/epg.dat not found, try /epg.dat
[sKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[ePNG] couldn't open /usr/local/share/enigma2/PLi-HD/logos/pli.png
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/PLi-HD/logos/pli.png not found!. Please contact the skin's author!
[skin] SKIN ERROR in SecondInfoBar: No module named DMCHDCaidDisplay
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/buttons1/key_menu.png
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/skin_default/buttons1/key_menu.png not found!. Please contact the skin's author!
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/buttons1/key_info.png
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/skin_default/buttons1/key_info.png not found!. Please contact the skin's author!
[skin] Error: {skin.xml}: color 'crypt_emm' must be #aarrggbb or valid named color. Please contact the skin's author!
[sKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
no teletext plugin found!
RemovePopup, id = ZapError
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
playing 1:0:1:3E1F:2EE0:13E:820000:0:0:0:
not enough diskspace for timeshift! (less than 200MB)
not pauseable.
allocate channel.. 2ee0:013e
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10911000 Pol 1 SR 27502000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1161 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3E1F:2EE0:13E:820000:0:0:0:
allocate demux
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 27(16)
set sequence pos 3
set sequence pos 4
[sEC] setVoltage 1
[sEC] sleep 200ms
192.168
0.0.0.0
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 0, 11], 'up': True, 'mac': '00:03:91:f7:e6:b7', 'dhcp': True, 'bcast': [192, 168, 0, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}}
AT plugin not found
ER plugin not found
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
OURSTATE: failed, retune
tune failed.
DVB service failed to tune - error 1
AddPopup, id = ZapError
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 7
lircd-0.9.0[1434]: 2failed on bit 37

lircd-0.9.0[1434]: 2failed on bit 1


lircd-0.9.0[1434]: 1failed on bit 25

lircd-0.9.0[1434]: 2failed on bit 13


lircd-0.9.0[1434]: 2failed on bit 21




lircd-0.9.0[1434]: 1failed on bit 9

KEY_MENU: 008B
loading mainmenu XML...
[ePNG] failed to get png header
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/skin_default/tv.png not found!. Please contact the skin's author!
KEY_DOWN: 006C
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10911000 Pol 1 SR 27502000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1161 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_OK: 0160
action ->  OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
[ePNG] failed to get png header
Satconfig NimSelection
ScanSetup ScanSimple
ScanSetup ScanSetup
KEY_UP: 0067
unicode U+  1c not present
KEY_HOME: 0066
action ->  OkCancelActions cancel
nim 0 provides [(130, 'Hot Bird (13.0E)', 0), (192, 'Astra (19.2E)', 0)]
known: []
(130, 'Hot Bird (13.0E)', 0) not in  []
(192, 'Astra (19.2E)', 0) not in  [(130, 'Hot Bird (13.0E)', 0)]
nim 1 provides ['DVB-T']
known: [(130, 'Hot Bird (13.0E)', 0), (192, 'Astra (19.2E)', 0)]
DVB-T not in  [(130, 'Hot Bird (13.0E)', 0), (192, 'Astra (19.2E)', 0)]
KEY_RIGHT: 006A
action ->  SetupActions right
unknown action SetupActions/right! typo in keymap?
action ->  SetupActions ok
not enough diskspace for timeshift! (less than 200MB)
start release channel timer
ServiceScanCreateSummary
[sKIN] Parsing embedded skin <embedded-in-'ServiceScanSummary'>
[eDVBLocalTimerHandler] remove channel 0x1736800
[eEPGCache] remove channel 0x1736800
scan: allocating raw channel (on frontend 1) failed!
close frontend 0

 

 

putty.log 32.24 kB · 7 downloads

you can upload this u-boot 

nBOX ADB28xx by plfreebox@gmail.com  [32-bit mode]

U-Boot 1.3.1 (Aug  5 2012 - 10:17:06) - stm24_0057

[lappys41]

On 12/15/2013 at 5:44 PM, amigos26 said:

Proszę bardzo

 

nBOX ADB28xx by plfreebox@gmail.com  [32-bit mode]

U-Boot 1.3.1 (Aug  5 2012 - 10:17:06) - stm24_0057

DRAM:  256 MiB
NOR:     4 MiB
NAND:   64 MiB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  3  2  1  0 
(Re)start USB...
USB:   scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **
(Re)start USB...
USB:   scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Bad partition 1 **
## Booting image at 80060000 ...
Bad Magic Number

NAND read: device 0 offset 0x0, size 0x300000


Reading data from 0x0 --   0% complete.
Reading data from 0x7a00 --   1% complete.
Reading data from 0xf400 --   2% complete.
Reading data from 0x17000 --   3% complete.
Reading data from 0x1ea00 --   4% complete.
Reading data from 0x26600 --   5% complete.
Reading data from 0x2e000 --   6% complete.
Reading data from 0x35c00 --   7% complete.
Reading data from 0x3d600 --   8% complete.
Reading data from 0x45000 --   9% complete.
Reading data from 0x4cc00 --  10% complete.
Reading data from 0x54600 --  11% complete.
Reading data from 0x5c200 --  12% complete.
Reading data from 0x63c00 --  13% complete.
Reading data from 0x6b800 --  14% complete.
Reading data from 0x73200 --  15% complete.
Reading data from 0x7ae00 --  16% complete.
Reading data from 0x82800 --  17% complete.
Reading data from 0x8a200 --  18% complete.
Reading data from 0x91e00 --  19% complete.
Reading data from 0x99800 --  20% complete.
Reading data from 0xa1400 --  21% complete.
Reading data from 0xa8e00 --  22% complete.
Reading data from 0xb0a00 --  23% complete.
Reading data from 0xb8400 --  24% complete.
Reading data from 0xbfe00 --  25% complete.
Reading data from 0xc7a00 --  26% complete.
Reading data from 0xcf400 --  27% complete.
Reading data from 0xd7000 --  28% complete.
Reading data from 0xdea00 --  29% complete.
Reading data from 0xe6600 --  30% complete.
Reading data from 0xee000 --  31% complete.
Reading data from 0xf5c00 --  32% complete.
Reading data from 0xfd600 --  33% complete.
Reading data from 0x105000 --  34% complete.
Reading data from 0x10cc00 --  35% complete.
Reading data from 0x114600 --  36% complete.
Reading data from 0x11c200 --  37% complete.
Reading data from 0x123c00 --  38% complete.
Reading data from 0x12b800 --  39% complete.
Reading data from 0x133200 --  40% complete.
Reading data from 0x13ae00 --  41% complete.
Reading data from 0x142800 --  42% complete.
Reading data from 0x14a200 --  43% complete.
Reading data from 0x151e00 --  44% complete.
Reading data from 0x159800 --  45% complete.
Reading data from 0x161400 --  46% complete.
Reading data from 0x168e00 --  47% complete.
Reading data from 0x170a00 --  48% complete.
Reading data from 0x178400 --  49% complete.
Reading data from 0x17fe00 --  50% complete.
Reading data from 0x187a00 --  51% complete.
Reading data from 0x18f400 --  52% complete.
Reading data from 0x197000 --  53% complete.
Reading data from 0x19ea00 --  54% complete.
Reading data from 0x1a6600 --  55% complete.
Reading data from 0x1ae000 --  56% complete.
Reading data from 0x1b5c00 --  57% complete.
Reading data from 0x1bd600 --  58% complete.
Reading data from 0x1c5000 --  59% complete.
Reading data from 0x1ccc00 --  60% complete.
Reading data from 0x1d4600 --  61% complete.
Reading data from 0x1dc200 --  62% complete.
Reading data from 0x1e3c00 --  63% complete.
Reading data from 0x1eb800 --  64% complete.
Reading data from 0x1f3200 --  65% complete.
Reading data from 0x1fae00 --  66% complete.
Reading data from 0x202800 --  67% complete.
Reading data from 0x20a200 --  68% complete.
Reading data from 0x211e00 --  69% complete.
Reading data from 0x219800 --  70% complete.
Reading data from 0x221400 --  71% complete.
Reading data from 0x228e00 --  72% complete.
Reading data from 0x230a00 --  73% complete.
Reading data from 0x238400 --  74% complete.
Reading data from 0x23fe00 --  75% complete.
Reading data from 0x247a00 --  76% complete.
Reading data from 0x24f400 --  77% complete.
Reading data from 0x257000 --  78% complete.
Reading data from 0x25ea00 --  79% complete.
Reading data from 0x266600 --  80% complete.
Reading data from 0x26e000 --  81% complete.
Reading data from 0x275c00 --  82% complete.
Reading data from 0x27d600 --  83% complete.
Reading data from 0x285000 --  84% complete.
Reading data from 0x28cc00 --  85% complete.
Reading data from 0x294600 --  86% complete.
Reading data from 0x29c200 --  87% complete.
Reading data from 0x2a3c00 --  88% complete.
Reading data from 0x2ab800 --  89% complete.
Reading data from 0x2b3200 --  90% complete.
Reading data from 0x2bae00 --  91% complete.
Reading data from 0x2c2800 --  92% complete.
Reading data from 0x2ca200 --  93% complete.
Reading data from 0x2d1e00 --  94% complete.
Reading data from 0x2d9800 --  95% complete.
Reading data from 0x2e1400 --  96% complete.
Reading data from 0x2e8e00 --  97% complete.
Reading data from 0x2f0a00 --  98% complete.
Reading data from 0x2f8400 --  99% complete.
Reading data from 0x2ffe00 -- 100% complete.
3145728 bytes read: OK
## Booting image at 80060000 ...
   Image Name:   Linux-2.6.32.59_stm24_0211
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1928822 Bytes =   1.8 MiB
   Load Address: 80801000
   Entry Point:  80802000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2 mem=256m coprocessor_mem=4m@0x40000000,4m@0x40400000 nwhwconf=device:eth0,hwaddr:00:03:91:F7:E6:B7 init=/bin/devinit - 0x00000000 - 0 ...


INIT: version 2.86 booting

/tmp to cała wolna pamięć RAM
Mount /dev in tmpfs
Copying device nodes to /dev
init autofs4
boxtype ADB2850
init frontpanel
NAND skipped
Nie ma partycji records
Nie ma partucji data
Mounting local filesystems...
mount: mounting LABEL=records on /hdd failed: No such file or directory
mount: mounting LABEL=data on /media/data failed: No such file or directory
Cleaning /tmp /var/run.
Hostname: tuxish-Box.
init stmfb
VIDEO:scart
load a/v firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to 57a40
seeking to 120378
seeking to 1203b0
seeking to 1203e8
seeking to 12f230
seeking to 12f23c
seeking to 12f248
seeking to 1510c0
seeking to 14f0ac
seeking to 151100
init embx
init AVS
init player
init frontends DVB-S
init drivers
init CEC
init smartcard
init remote control
init nbox remote control
lircd-0.9.0[1434]: lircd(default) ready, using /var/run/lirc/lircd

Starting portmap daemon...Model: adb2850
vBoxType: 13
Input device name: "TDT RC event driver"
Selected Remote: NBOX RemoteControl
RemoteControl Map: E2 code
Supports Long KeyPress: 0
lircd-0.9.0[1434]: accepted new client on /var/run/lirc/lircd

.
showSinglePic /boot/logo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Starting FTP server: vsftpd.
Start network
Reconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured
udhcpc (v1.21.1) started
Sending discover...
Sending select for 192.168.0.11...
Lease of 192.168.0.11 obtained, lease time 86400
route: SIOCDELRT: No such process
adding dns 95.160.170.92
adding dns 88.156.222.92
adding dns 8.8.8.8
done.
$Starting sshd:ok
Synchronizacja NTP
15 Dec 13:09:41 ntpdate[1531]: step time server 31.216.56.5 offset 440424536.895353 sec
Start Demonów
Load E2
Uruchamianie USB Serial Port jeżli został aktywowany
Start SoftCam
Cron włączony
Wykonuję rc.users.sh
Start SoftCam
crond[1541]: crond: crond (busybox 1.21.1) started, log level 8

PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
12288k total video mem
4188k usable video mem
2568kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
couldn't open LCD - load lcd.ko!
lcd buffer 0x7761b8 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[font] initializing lib...
[font] loading fonts...
[font] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "TDT RC event driver" is a remotecontrol
failed to open /dev/input/event1
Input device "" is a remotecontrol
failed to open /dev/input/event2
Input device "" is a remotecontrol
failed to open /dev/input/event3
Input device "" is a remotecontrol
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 4425 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) No such device
opening frontend 2
close frontend 2
boxtype detection BOX_SH4

found 1 adapter, 2 frontends(2 sim) and 2 demux, boxtype 33
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait9.png
found 8 spinner!

executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
Reading satellites.xml
Reading terrestrial.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
eDVBResourceManager::setFrontendSlotInformations .. assigned 2 socket informations, but 1 registered frontends!
slot: 0 configmode: simple
diseqcmode:  diseqc_a_b
sec config completed
[infoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 1
205 entries in Bouquet userbouquet.dbe00.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 206
179 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.dbe5f.tv 385
182 entries in Bouquet userbouquet.dbe5f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2a.tv 567
67 entries in Bouquet userbouquet.dbe2a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe3d.tv 634
51 entries in Bouquet userbouquet.dbe3d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 685
68 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe23.tv 753
151 entries in Bouquet userbouquet.dbe23.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 904
201 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 1105
81 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 1186
83 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0f.tv 1269
94 entries in Bouquet userbouquet.dbe0f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2c.tv 1357
182 entries in Bouquet userbouquet.dbe2c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe37.tv 1534
54 entries in Bouquet userbouquet.dbe37.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1587
52 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 1639
45 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 1684
148 entries in Bouquet userbouquet.dbe08.tv
loading bouquet... /etc/enigma2/userbouquet.dbe12.tv 1832
74 entries in Bouquet userbouquet.dbe12.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2b.tv 1906
70 entries in Bouquet userbouquet.dbe2b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 1976
227 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.dbe10.tv 2202
24 entries in Bouquet userbouquet.dbe10.tv
loading bouquet... /etc/enigma2/userbouquet.dbe13.tv 2226
131 entries in Bouquet userbouquet.dbe13.tv
loading bouquet... /etc/enigma2/userbouquet.dbe16.tv 2357
226 entries in Bouquet userbouquet.dbe16.tv
loading bouquet... /etc/enigma2/userbouquet.dbe18.tv 2582
73 entries in Bouquet userbouquet.dbe18.tv
loading bouquet... /etc/enigma2/userbouquet.dbe14.tv 2655
39 entries in Bouquet userbouquet.dbe14.tv
loading bouquet... /etc/enigma2/userbouquet.dbe15.tv 2694
81 entries in Bouquet userbouquet.dbe15.tv
loading bouquet... /etc/enigma2/userbouquet.dbe81.tv 2775
56 entries in Bouquet userbouquet.dbe81.tv
loading bouquet... /etc/enigma2/userbouquet.dbe17.tv 2831
54 entries in Bouquet userbouquet.dbe17.tv
loading bouquet... /etc/enigma2/userbouquet.dbe19.tv 2885
49 entries in Bouquet userbouquet.dbe19.tv
loading bouquet... /etc/enigma2/userbouquet.dbe20.tv 2933
66 entries in Bouquet userbouquet.dbe20.tv
loading bouquet... /etc/enigma2/userbouquet.dbe21.tv 2999
28 entries in Bouquet userbouquet.dbe21.tv
loading bouquet... /etc/enigma2/userbouquet.dbe22.tv 3027
22 entries in Bouquet userbouquet.dbe22.tv
loading bouquet... /etc/enigma2/userbouquet.dbe24.tv 3049
38 entries in Bouquet userbouquet.dbe24.tv
loading bouquet... /etc/enigma2/userbouquet.dbe25.tv 3087
42 entries in Bouquet userbouquet.dbe25.tv
loading bouquet... /etc/enigma2/userbouquet.dbe26.tv 3128
40 entries in Bouquet userbouquet.dbe26.tv
loading bouquet... /etc/enigma2/userbouquet.dbe27.tv 3168
162 entries in Bouquet userbouquet.dbe27.tv
loading bouquet... /etc/enigma2/userbouquet.dbe28.tv 3330
75 entries in Bouquet userbouquet.dbe28.tv
loading bouquet... /etc/enigma2/userbouquet.dbe29.tv 3405
23 entries in Bouquet userbouquet.dbe29.tv
loading bouquet... /etc/enigma2/userbouquet.dbe30.tv 3428
19 entries in Bouquet userbouquet.dbe30.tv
loading bouquet... /etc/enigma2/userbouquet.dbe31.tv 3447
43 entries in Bouquet userbouquet.dbe31.tv
loading bouquet... /etc/enigma2/userbouquet.dbe32.tv 3489
164 entries in Bouquet userbouquet.dbe32.tv
loading bouquet... /etc/enigma2/userbouquet.dbe33.tv 3653
22 entries in Bouquet userbouquet.dbe33.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0e.tv 3675
10 entries in Bouquet userbouquet.dbe0e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0a.tv 3685
46 entries in Bouquet userbouquet.dbe0a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 3731
3 entries in Bouquet userbouquet.dbe0b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe65.tv 3734
37 entries in Bouquet userbouquet.dbe65.tv
loading bouquet... /etc/enigma2/userbouquet.dbe7f.tv 3771
328 entries in Bouquet userbouquet.dbe7f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe6b.tv 4086
12 entries in Bouquet userbouquet.dbe6b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe69.tv 4096
1 entries in Bouquet userbouquet.dbe69.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 4097
0 entries in Bouquet userbouquet.favourites.tv
49 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 1
17 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe01.radio 18
17 entries in Bouquet userbouquet.dbe01.radio
loading bouquet... /etc/enigma2/userbouquet.dbe04.radio 35
12 entries in Bouquet userbouquet.dbe04.radio
loading bouquet... /etc/enigma2/userbouquet.dbe05.radio 47
12 entries in Bouquet userbouquet.dbe05.radio
loading bouquet... /etc/enigma2/userbouquet.dbe06.radio 59
33 entries in Bouquet userbouquet.dbe06.radio
loading bouquet... /etc/enigma2/userbouquet.dbe07.radio 92
51 entries in Bouquet userbouquet.dbe07.radio
loading bouquet... /etc/enigma2/userbouquet.dbe09.radio 143
62 entries in Bouquet userbouquet.dbe09.radio
loading bouquet... /etc/enigma2/userbouquet.dbe0c.radio 204
27 entries in Bouquet userbouquet.dbe0c.radio
loading bouquet... /etc/enigma2/userbouquet.dbe10.radio 231
10 entries in Bouquet userbouquet.dbe10.radio
loading bouquet... /etc/enigma2/userbouquet.dbe11.radio 241
26 entries in Bouquet userbouquet.dbe11.radio
loading bouquet... /etc/enigma2/userbouquet.dbe12.radio 267
20 entries in Bouquet userbouquet.dbe12.radio
loading bouquet... /etc/enigma2/userbouquet.dbe13.radio 287
17 entries in Bouquet userbouquet.dbe13.radio
loading bouquet... /etc/enigma2/userbouquet.dbe14.radio 304
60 entries in Bouquet userbouquet.dbe14.radio
loading bouquet... /etc/enigma2/userbouquet.dbe15.radio 364
37 entries in Bouquet userbouquet.dbe15.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 401
0 entries in Bouquet userbouquet.favourites.radio
15 entries in Bouquet bouquets.radio
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[font] adding font /usr/local/share/fonts/cool.ttf...OK (Regular)
[font] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[font] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Console)
[font] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed)
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[font] adding font /usr/local/share/fonts/cool.ttf...OK (Regular)
[font] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[font] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Console)
[font] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed)
[font] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs)
[font] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
Selected keymap does not exist!
Activating language Polski
Renumbering...
[ePopen] command: ip -o addr show dev eth0
Plugin  Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[eSocketMMIHandler] created successfully
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
setMode - port: Scart mode: PAL rate: 50Hz
-> setting aspect, policy, policy2, wss any bestfit policy auto
updateColor:  Scart
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
starting hotplug handler
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[EPGC] /hdd/epg.dat not found, try /epg.dat
[sKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[ePNG] couldn't open /usr/local/share/enigma2/PLi-HD/logos/pli.png
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/PLi-HD/logos/pli.png not found!. Please contact the skin's author!
[skin] SKIN ERROR in SecondInfoBar: No module named DMCHDCaidDisplay
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/buttons1/key_menu.png
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/skin_default/buttons1/key_menu.png not found!. Please contact the skin's author!
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/buttons1/key_info.png
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/skin_default/buttons1/key_info.png not found!. Please contact the skin's author!
[skin] Error: {skin.xml}: color 'crypt_emm' must be #aarrggbb or valid named color. Please contact the skin's author!
[sKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
no teletext plugin found!
RemovePopup, id = ZapError
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
playing 1:0:1:3E1F:2EE0:13E:820000:0:0:0:
not enough diskspace for timeshift! (less than 200MB)
not pauseable.
not enough diskspace for timeshift! (less than 200MB)
not pauseable.
not enough diskspace for timeshift! (less than 200MB)
RemovePopup, id = ZapError
allocate channel.. 2ee0:013e
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10911000 Pol 1 SR 27502000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1161 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3E1F:2EE0:13E:820000:0:0:0:
allocate demux
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 27(16)
set sequence pos 3
set sequence pos 4
[sEC] setVoltage 1
[sEC] sleep 200ms
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[95, 160, 170, 92], [88, 156, 222, 92], [8, 8, 8, 8]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 0, 11], 'up': True, 'mac': '00:03:91:f7:e6:b7', 'dhcp': True, 'bcast': [192, 168, 0, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}}
AT plugin not found
ER plugin not found
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10911000 Pol 1 SR 27502000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1161 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
RemovePopup, id = ZapError
AddPopup, id = ZapError
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
lircd-0.9.0[1434]: 2failed on bit 37

lircd-0.9.0[1434]: 2failed on bit 1

lircd-0.9.0[1434]: 2failed on bit 1

lircd-0.9.0[1434]: 1failed on bit 25

lircd-0.9.0[1434]: 2failed on bit 13

lircd-0.9.0[1434]: 2failed on bit 1

lircd-0.9.0[1434]: 2failed on bit 21

lircd-0.9.0[1434]: 2failed on bit 21

lircd-0.9.0[1434]: 2failed on bit 1

lircd-0.9.0[1434]: 2failed on bit 1

lircd-0.9.0[1434]: 1failed on bit 9

OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10911000 Pol 1 SR 27502000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1161 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_MENU: 008B
action ->  InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
[ePNG] failed to get png header
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/skin_default/tv.png not found!. Please contact the skin's author!
KEY_DOWN: 006C
KEY_DOWN: 006C
KEY_DOWN: 006C
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10911000 Pol 1 SR 27502000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1161 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_OK: 0160
action ->  OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
[ePNG] failed to get png header
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/skin_default/tv.png not found!. Please contact the skin's author!
KEY_DOWN: 006C
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10911000 Pol 1 SR 27502000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1161 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
KEY_OK: 0160
action ->  OkCancelActions ok
okbuttonClick
Satconfig NimSelection
ScanSetup ScanSimple
ScanSetup ScanSetup
[ePNG] failed to get png header
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/skin_default/tv.png not found!. Please contact the skin's author!
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_DOWN: 006C
KEY_UP: 0067
KEY_OK: 0160
action ->  OkCancelActions ok
okbuttonClick
[ePNG] failed to get png header
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/skin_default/tv.png not found!. Please contact the skin's author!
unicode U+  1c not present
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10911000 Pol 1 SR 27502000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1161 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_HOME: 0066
action ->  OkCancelActions cancel
KEY_DOWN: 006C
KEY_OK: 0160
action ->  OkCancelActions ok
okbuttonClick
nim 0 provides [(130, 'Hot Bird (13.0E)', 0), (192, 'Astra (19.2E)', 0)]
known: []
(130, 'Hot Bird (13.0E)', 0) not in  []
(192, 'Astra (19.2E)', 0) not in  [(130, 'Hot Bird (13.0E)', 0)]
nim 1 provides ['DVB-T']
known: [(130, 'Hot Bird (13.0E)', 0), (192, 'Astra (19.2E)', 0)]
DVB-T not in  [(130, 'Hot Bird (13.0E)', 0), (192, 'Astra (19.2E)', 0)]
[ePNG] failed to get png header
[skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/skin_default/tv.png not found!. Please contact the skin's author!
KEY_DOWN: 006C
KEY_RIGHT: 006A
action ->  SetupActions right
unknown action SetupActions/right! typo in keymap?
action ->  SetupActions right
OURSTATE: failed, retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10911000 Pol 1 SR 27502000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1161 mhz
OURSTATE: tuning
tune failed.
DVB service failed to tune - error 1
ignore sdt update data.... incorrect transponder tuned!!!
set sequence pos 3
set sequence pos 7
[sEC] invalidate current switch params
[sEC] sendDiseqc: e00000(DiSEqC reset)
[sEC] sleep 50ms
[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[sEC] sleep 150ms
[sEC] sendDiseqc: e01038f0(?)
[sEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[sEC] update current switch params
[sEC] startTuneTimeout 5000
[sEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[sEC] sleep 500ms
KEY_OK: 0160 ***********************************WYSZUKAJ AUTOMATYCZNIE DVB-T******
action ->  SetupActions ok
not enough diskspace for timeshift! (less than 200MB)
start release channel timer
ServiceScanCreateSummary
[sKIN] Parsing embedded skin <embedded-in-'ServiceScanSummary'>
[eDVBLocalTimerHandler] remove channel 0x1736800
[eEPGCache] remove channel 0x1736800
scan: allocating raw channel (on frontend 1) failed!
KEY_HOME: 0066*********************************** BACK KLAWISZ************
action ->  OkCancelActions cancel
close frontend 0

 

 

putty.log 32.24 kB · 7 downloads

please upload this u-boot