Skocz do zawartości

matzg

Members
 Pokaż profil  Zobacz aktywność

  • Postów

    1 052

  • Dołączył

  • Ostatnia wizyta

 Typ zawartości 

Odpowiedzi opublikowane przez matzg

    build u-boot

    w Wsparcie dla SH4

    Opublikowano · Edytowane przez matzg

    7 godzin temu, lappys41 napisał(a):

    you can send me your contact details, like skype,telegram,whatsapp

    i want try this u-boot, how  to boot this u-boot, i have BGA64 flash 

    there is no such possibility... I don't speak English, I use Google translator
    I have never programmed u-boot via Jtag

    build u-boot

    w Wsparcie dla SH4

    Opublikowano 

    Hello,
I don't know if I'll help...
what decoder is this?

For me on adb2850 it looks like this:

      

    clean uboot without -env
    nBOX ADB28xx by plfreebox@gmail.com  [32-bit mode]


U-Boot 1.3.1 (Aug  5 2012 - 10:17:06) - stm24_0057

DRAM:  256 MiB
NOR:     4 MiB
NAND:   64 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
    adding env
    set ethaddr 00:01:01:01:01:01
set bootdelay 3

set bootkern_0 'usb reset; ext2load usb 0:1 80060000 /boot/uImage; bootm 80060000'
set bootargs_0 'set bootargs console=ttyAS0,115200 root=/dev/sda1 rw mem=256m coprocessor_mem=4m@0x40000000,4m@0x40400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:${ethaddr} init=/bin/devinit'

set bootkern_1 'nand read.i 0x80060000 0x0 0x300000; bootm 80060000'
set bootargs_1 'set bootargs console=ttyAS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2 mem=256m coprocessor_mem=4m@0x40000000,4m@0x40400000 nwhwconf=device:eth0,hwaddr:${ethaddr} init=/bin/devinit'

set bootcmd 'run bootargs_0; run bootkern_0;run bootargs_1; run bootkern_1'

saveenv
ledblink 3 0 200
    and after uploading the env I have this
    U-Boot 1.3.1 (Aug  5 2012 - 10:17:06) - stm24_0057

DRAM:  256 MiB
NOR:     4 MiB
NAND:   64 MiB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  3  2  1  0 
(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **
(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Bad partition 1 **
## Booting image at 80060000 ...
    maybe you also need to download the env appropriate for your decoder

      

    u-boot file for adb2850 I have..
did you ask from the source plfreebox@gmail.com?

     

×
×
  • Dodaj nową pozycję...